Holley systemax hardware?

[91CoupeMike]

Where abouts can I find the hardware? I can use studs and 12pnt nuts for the most part but what about the long center bolts? I figure that would be hard to find at a hardware store.

Thanks.

[Sleeper]

You can buy them from holley. If not I think the instructions tell you the length and thread size. Id download it and see.

[greenbullitt]

alot of people use allthread when they dont have the correct stuff. allen heads if fastenal or someone has anything that long

[Magnimike1]

Until you can get holley's correct hardware you can get along with bolts from ace hardware

[91CoupeMike]

Didn't realize I could buy it fro holley, I tried summit and couldnt come up with anything. Didn't think about using an allthread for temporary, and mike I didnt think ace would have something that long?

I'll see if I can get some specs and from there it should be fairly simple.

Thanks guys.

[projectPONY]

I've gotten hardware from Homedepot for it. Just mock it up and measure for length. I get them 1/2" longer so there is plenty of threads in the receiving part.

sent from an htc EVO, the iCrap killer.

[projectPONY]

...oh, the reason I didn't give you any is because I misplaced it but it was just from homedepot.

sent from an htc EVO, the iCrap killer.

[91CoupeMike]

...oh, the reason I didn't give you any is because I misplaced it but it was just from homedepot.

sent from an htc EVO, the iCrap killer.

Lol all is good I didnt even think about it at the time, I'll head up to home depot later and see what trouble I can get into.

[Damnittsteve]

buy it from autozone

[91CoupeMike]

buy it from autozone

I'm sorry sir, but it looks like I'd have to order it from the warehouse...

We have/can order the edlebrock intake bolts, used to carry Holley stuff but not any more.

[Damnittsteve]

no discount on special order either

[sspstang]

Oriely has some Holley stuff.

[91CoupeMike]

no discount on special order either

Certain times employees get 10%.. They want 40$ for the eddy bolts. They also want 1200$ for a rpm2 lol

[sspstang]

Let me ask you this, is trick flow not the same? I dunno but I know my intake has 2 bitch 12 point bolts in it. The rest are just nuts, and those can be bought at a hardware store. Will the stock 2 bolts not work?

[Damnittsteve]

Let me ask you this, is trick flow not the same? I dunno but I know my intake has 2 bitch 12 point bolts in it. The rest are just nuts, and those can be bought at a hardware store. Will the stock 2 bolts not work?

calm down dude.