Stud mount rocker arm hardware.

[91CoupeMike]

I have searched trick flow, summit, comp cams and google. I couldn't find squat. I have stud mount trick flow rocker arms and I need the polylock/nut to secure them to the stud.

Also, where can I find the intake bolts for a systemax?

Thanks.

[Roger]

Type in "rocker arm nut" in a Summit search.

[sspstang]

Type in "rocker arm nut" in a Summit search.

This

[BlueCoupeRedVert]

Or ebay

[turbos66coupe]

Call summit.

[91CoupeMike]

Ok so I found them, how do I figure what size I need? .5 .55 or .6?

[TEAMJACOB]

Measure them

[91CoupeMike]

Measure them

Measure what? I don't have any to begin with.

[Roger]

Ok so I found them, how do I figure what size I need? .5 .55 or .6?

Probably the 3/8" .550 od.

TFS-70000903-8

[TEAMJACOB]

Sorry. For some reason, I was thinking you were missing just one or two

[91CoupeMike]

Probably the 3/8" .550 od.

TFS-70000903-8

Was told they are 7/16th.

What's the importance and why are there 3 differant diameters?

Anyone know on the systemax bolts?

[Roger]

Was told they are 7/16th.

What's the importance and why are there 3 differant diameters?

Anyone know on the systemax bolts?

Verify that you have 3/8 or 7/16 studs and rocker arms. Then look up the rocker arm on Summit. The part discription will tell you slot size. To big an OD either won't fit into the rocket arm slot or it will rub on the rocker arm.
If you bought a bunch of random used parts, make sure your rocker arms fit the stud mounts.

[FoxBodyNick]

They are 7/16th

[03shadow4v]

Was told they are 7/16th.

What's the importance and why are there 3 differant diameters?

Anyone know on the systemax bolts?

You were told they are 7/16 then why are you still asking ?

[racrguy]

You were told they are 7/16 then why are you still asking ?

You don't read very well, do you dumbass?