Tweet
Ok, is its a 76' c10 w/ Power windows.
Drivers side works fine.
Pasanger hasn't worked since I got it. Finally started trying to find out why today.
Power to switch- check
Switch good- check
Harness connector at motor getting 12v on either up or down on switch- check
Window Motor work with switch - no go
Window motor work applying 12v directly to it on either side- no go
Window motor work applying 12v & ground directly to it- check.
So when I hook power to either side of the window motor and ground the other side it works fine. Reverse wires and motor reverses.
There is a pair of wires going to the motor colored Blue & Brown
Off the switch on psgr side they are Pink(12v const) blue w/ white stripe & brown.
Some how the motor is not grounding when I hit the switch? I can not find a relay anywhere that would go to the door/window either.
Can anyone help? Either with links or directions ?
I have been on Google for 30 minutes now and can't find what I'm looking for.
Thanks in advance!!!!!
Drivers side works fine.
Pasanger hasn't worked since I got it. Finally started trying to find out why today.
Power to switch- check
Switch good- check
Harness connector at motor getting 12v on either up or down on switch- check
Window Motor work with switch - no go
Window motor work applying 12v directly to it on either side- no go
Window motor work applying 12v & ground directly to it- check.
So when I hook power to either side of the window motor and ground the other side it works fine. Reverse wires and motor reverses.
There is a pair of wires going to the motor colored Blue & Brown
Off the switch on psgr side they are Pink(12v const) blue w/ white stripe & brown.
Some how the motor is not grounding when I hit the switch? I can not find a relay anywhere that would go to the door/window either.
Can anyone help? Either with links or directions ?
I have been on Google for 30 minutes now and can't find what I'm looking for.
Thanks in advance!!!!!