Lightning maf, 3.5in Power pipe, 70mm accufab race Throttle body?

[91CoupeMike]

I'm running a Anderson power pipe 3.5inch.

The lightning maf and throttle body require 4inch couplunge/elbow.

What suggestions would you guys recommend besides buying a 4inch power pipe?

90mm is 3.5 inches so I don't see a reason to increase to 4inch, just for couplings.

Any help needed/wanted!

Thanks!

[sspstang]

Nazzzzz!!!!!!!!!!!!

[sspstang]

What mach?

[91CoupeMike]

Ninja edit!

Everytime I see sspstang I think it's crapstang. My bad. Lol

[Blackpony]

have you already bought the tb? the race version is not necessary on your application.

[KungFuHamster]

doesn't a LMAF require 42 lb injectors? if so, thats way too much injector for you, unless you decided on a blower and i missed that thread.

[FoxBodyNick]

im pretty sure truestreet is going fix him right up with the LMAF and 24#ers

[91CoupeMike]

have you already bought the tb? the race version is not necessary on your application.

Yes, and I know it's overkill, but it has room to grow.

[91CoupeMike]

doesn't a LMAF require 42 lb injectors? if so, thats way too much injector for you, unless you decided on a blower and i missed that thread.

With a tune you can set it for 24#. The lighting mass air is has a good meter

[KungFuHamster]

With a tune you can set it for 24#. The lighting mass air is has a good meter

oh yeah. damn...its been a while.

[sspstang]

Ninja edit!

Everytime I see sspstang I think it's crapstang. My bad. Lol

Dude!

[matts5.0]

4" pipe

[Blackpony]

Yes, and I know it's overkill, but it has room to grow.

i would go with the 4'' pipe then. Otherwise it will look stupid reducing down then back up. rather then the anderson pipe just build your own cai. 4'' elbow, 4'' aluminum tube and 4'' coupler and your done. I think we have the supplies to build you one. Give us a call at the shop tomorrow.

[Diabolic]

Yep, 4" all the way.

[dblack1]

3.5" is the ID and a 3.5" coupler will not fit unless you heat/stretch it. You will need a reducer for the 70mm TBody connection.