Need Help With These Tranny Plugs

[BLK306]

Ok my car had the plugs cut off of that come out of the car and plug in to the tranny. So I went to the junk yard and cut the plugs out of another car. When I got home I was looking everything over and I only have enough wire coming out my car for two of the plugs. I have wired in the plug for the spedo gear and I have wired in the four wire plug that plugs in the aft plug on the tranny. There are no other wires coming out of the car for the two wire plug that goes to the front of the transmission. Does this plug spice in to some of the other wires? I did not see anything of the such when I cut it out of the junk yard car. Do certain year models use different plugs? I cut the plugs out of an 88 and mine is a 93. I don't know why I have more plugs than I do wires. Any help would be greatly appreciated.

Pic of the plugless wires coming out of my car



The two plugs coming off of the transmission


And the two wire plug that I have left over after wiring in the other two.

[greenbullitt]

that is a neutral safety in the top shift cover. 4 cyl cars didnt have them...it will be fine unplugged if your body harness doesnt have the provision

[BLK306]

Cool thanks Paul.

[greenbullitt]

Cool thanks Paul.

np!

[mstng86]

what are you going to do with that switch? I need it.