Announcement

Collapse
No announcement yet.

Need help finding these brackets

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Need help finding these brackets



    Found on 1980-1997 F250 and F350 4x4 trucks, normally held on by big rivets. They hold the rear part of the front leaf spring. I've searched around waco for a few months but only found a few at the upullit yard where they don't allow torches, searched craigslist and anyone parting one out would rather sell the whole truck than leave it immobile. So, I'm asking you guys if you find some at a junkyard thats willing to cut them off or know someone that has some let me know. I'm willing to reimburse anyone that comes up with a pair.

  • #2
    Drill the rivets. No need for a torch.
    2006 Civic SI
    2009 Pilot
    1988 GT
    CRF50

    Widebody whore.

    Comment


    • #3
      Air hammer with a sharp chisel to remove the rivet on one side then a punch to push it out.
      The only difference between a tax man and a taxidermist is that the taxidermist leaves the skin. -- Mark Twain

      Comment


      • #4
        ford services them, usually not too expensive...if they arent obsolete
        Ring and pinion specialist

        Comment


        • #5
          Paul, you actually checked the pn a few months ago,but I know they are discontinued.

          I appreciate the tips but this was a thread for someone to make some extra cash if they were at a junkyard or knew someone with some

          Comment

          Working...
          X