Announcement

Collapse
No announcement yet.

4L80 or PowerGlide

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Originally posted by Mr. Red Pony View Post
    4L60 is cheaper than a 4L80 by a little bit. An if you want to sell it, it will be a bit easier to sell if needed because you can change the bell housing for whatever you need.
    and you would have to pull it every pass in his application.
    Ring and pinion specialist

    Comment


    • Originally posted by greenbullitt View Post
      fuck that pile of shit
      There is NO way a 4L60e would make it more than a few passes in that car.
      You can bandaid them to take some abuse but when it comes down to it its just not a good starting platform when you have a PG or 4L80e available...

      Comment


      • a 1000+hp coupe in this very thread went mid 5's on one of mikes c-4's on radial's.

        BIG BANK would go with a CS2 and a carbon sliper, or turbo glide.

        for what you are doing, i am sure Mike has you taken care of.

        Comment


        • Originally posted by Sam88gta1 View Post
          Sorry for questioning you running .4 faster one single pass.
          .25 faster then it's 2nd fastest pass that night, and that was with a 60' that was .15 faster then the other passes. went 6.1 that same night leaving with absolutely no boost at all, only t&t run was the 5.85, all the other runs were on a pro-tree and i didn't get staged in time to build up boost. it is all good though, if the weather is good next weekend i'll be at the track.

          Comment




          • after seeing a "real" shaft, i feel lucky to have survived on the stocker!

            Comment


            • Originally posted by dville_gt View Post
              after seeing a "real" shaft, i feel lucky to have survived on the stocker!
              whoa.. that might be QOTM.

              Comment

              Working...
              X