Tweet
Having trouble with headlights working, changed the bulbs and still not working! Any ideas? It is a crew cab hemi if that helps at all with 118,000 on the ticker.
-
Wanna see my care face??? -
Fuse? -
Most likely the front controll module is fried. Are you running aftermarket lights? If so then that might be your issue. Seen it several times.Comment
-
They are Ultra highbeam lights.Originally posted by Scott Mc View PostWanna see my care face???Comment
-
It is only the driver side headlight that is having issues.Wanna see my care face???Comment
-
Does it have the integrated fuse box behind the drivers headlamp (it runs down at an angle from near the fender towards the motor rather that being flat with a lift off cover). These are notorius for failure, it runs independent lamp drivers for each lamp and beam meaning if that particular driver fails then you loose that specific lamp such as drivers high beam only.
Fuse box like the one with red cover in picLast edited by shumpertdavid; 09-26-2012, 12:40 PM.Comment
-
-
check for power if you dont have any it the fuse boxComment
-
Power is there. The bulb is good because it works in the passenger side.Wanna see my care face???Comment
-
-
High beams work on that side?Comment
-
Check for a bad fuse, lot of newer vehicles have a fuse for each lamp and beamComment
-
-
it's at the dealership now, I came to the FCM as well, oh well, I would think that it wouldn't be having this problem already!Originally posted by Cooter View PostWanna see my care face???Comment
-
already? the thing is 8yrs old! LOL
they were bad about FCM's back when they were fairly new. I'd say you got a good life out of it!Comment
Comment