Announcement

Collapse
No announcement yet.

93 fox wiring diagrams

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 93 fox wiring diagrams

    Looking for a under the hood wiring diagram. I have a few wires that are cut on my lights/horn harness and don't know if they went to the solenoid or not. Anyone got a good diagram of what wires go where and the color code of them?

    I have visited http://www.veryuseful.com/mustang/tech/engine/
    but not exactly what I am looking for, and I am doing a carb'd setup so I do not need the EFI harness

  • #2
    Make your own! What's up with your post count?
    Wanna see my care face???

    Comment


    • #3
      That's a good question lol

      but I have all the wiring, my tail lights work, but headlights dont. everything is wired up but one of the cut wires looks to be a ground wire not sure how everything is supposed to workout and what all is needed/not needed

      Comment


      • #4
        Wait do you already have the car back together?
        Wanna see my care face???

        Comment


        • #5
          I had a diagram at one point, but it must have been on a old hard drive. I believe TENGRAM or MOSFET might be able to help you.
          Wanna see my care face???

          Comment


          • #6
            Pretty much yes, just finishing the wiring. Not using a starter solenoid so I will bypass that, but there were a few wires cut and I have no idea what they go to. Trying to figure out why none of the headlights will work or my blinkers, im just in a stump right now and cant find good schematics

            Comment


            • #7
              And you have checked the fuses?
              Wanna see my care face???

              Comment


              • #8
                fuses look great, none seem to be blown, im about to crawl back under the dash and see what I can find but I may be pulling the dash out again to see if I missed something

                Comment


                • #9
                  Been there done that, good luck, sorry I couldn't find what you needed.
                  Wanna see my care face???

                  Comment


                  • #10
                    Not a problem, just going to check some voltage and see where im losing my power at. Only fuse I noticed that was blown was the horn fuse, but that doesnt have anything to do with my lights. I have 2 wires I am trying to figure out right now and I have a feeling they are the starter or alternator wires so I don't think they are a big deal to me. Not using a ford engine, just trying to figure out the ford wiring

                    Comment


                    • #11
                      Gotcha!
                      Wanna see my care face???

                      Comment


                      • #13
                        I have paper copies of the wiring diagrams. You're welcome to come by and have a look at them if you're near North Ft. Worth.

                        Comment


                        • #14
                          Been there, seen tons and tons of different schematics but none seem to be exactly what I need.

                          Originally posted by Rotortrash View Post
                          I have paper copies of the wiring diagrams. You're welcome to come by and have a look at them if you're near North Ft. Worth.
                          I may have to come take a look if I can't figure this out!

                          Comment


                          • #15
                            Originally posted by FowlerMotorsports View Post
                            I may have to come take a look if I can't figure this out!
                            Let me know, I have the actual Ford diagrams that were purchased in 1992.

                            Comment

                            Working...
                            X