Started with 500/523.
Went from .68 AR turbo housing and 3in DP and single exhaust to
.81 AR, 3.5in DP and 4in single exhaust.
1st run was 538/545...not a bad gain for $300 in parts and a little elbow grease!
Runs went down as heat soak kicked in, but curve is rediculously smooth!
Max boost is 13psi at about 4800 where TQ levels off at 514 and stays flat till 6K!(Heat soaked numbers)
Love it! Thanks, Andy, and thanks to Lonestar for use of the Dyno! (Brian's a good guy!)
-Jonny
Went from .68 AR turbo housing and 3in DP and single exhaust to
.81 AR, 3.5in DP and 4in single exhaust.
1st run was 538/545...not a bad gain for $300 in parts and a little elbow grease!
Runs went down as heat soak kicked in, but curve is rediculously smooth!
Max boost is 13psi at about 4800 where TQ levels off at 514 and stays flat till 6K!(Heat soaked numbers)
Love it! Thanks, Andy, and thanks to Lonestar for use of the Dyno! (Brian's a good guy!)
-Jonny
Comment