What to ask for Brand New 87 - 93 On3 Turbo kit

[SEB]

Got this kit on trade & was thinking about running it on my 90 mustang. But i dont trust the electronics & thinking about just selling the kit & selling my Tremec 3550 trans setup too & my 90 5.0 hatch & putting the money somewhere else in my life.

This kit is really nice. Has some high dollar stuff with it. HPX 60lb injectors with the PMAS Mass Air chip for the On3 Turbo kit which alone is $600 & the On3 Turbo kit sells new for $1400 & it also came with the exhaust side. But not sure what a fair price is or if I would be better trying to trade the Kit & tremec Trans with Clutch & my 90 mustang for something fun

[Jimbo]

I have been looking at those kits. I haven't seen any bad press on them other than worries about the chinese turbo the base kit comes with.
I would total up the original price plus the extras and drop one or two hundred off if it is all unused. At least that would be my starting point. Good luck with the sale.

[crapstang]

Got this kit on trade & was thinking about running it on my 90 mustang. But i dont trust the electronics & thinking about just selling the kit & selling my Tremec 3550 trans setup too & my 90 5.0 hatch & putting the money somewhere else in my life.

This kit is really nice. Has some high dollar stuff with it. HPX 60lb injectors with the PMAS Mass Air chip for the On3 Turbo kit which alone is $600 & the On3 Turbo kit sells new for $1400 & it also came with the exhaust side. But not sure what a fair price is or if I would be better trying to trade the Kit & tremec Trans with Clutch & my 90 mustang for something fun

Post it for high and wait for the low ballers, then average it out a bit. or just put it in the hatch

[bonnie&clyde]

I'll give u 1500 for it

[SEB]

I'll give u 1500 for it

I will get pics posted. Also comes with Accufab 70mm TB

[CJ]

I will get pics posted. Also comes with Accufab 70mm TB

Interesting..

[VaderTT]

I have been looking at those kits. I haven't seen any bad press on them other than worries about the chinese turbo the base kit comes with.
I would total up the original price plus the extras and drop one or two hundred off if it is all unused. At least that would be my starting point. Good luck with the sale.

This was within 5min of searching on 1 site. Give me 20min and I could find hundreds.

I would take the offer of $1500. The kits are selling nib from private sellers for around 1k. seperate the kit and the pmas/injectors and sell them for around $4-550.

I was acctually thinking about picking one up and throwing it on a junker fox.
It would be Chad's (the retard) mild steel hotside
masterpower upgraded turbo
I'd take apart the WG and BOW to clean the metal shavings
and stock up on rtv for the poorly sealing v-bands.

http://www.theturboforums.com/smf/bs-(non-tech)-forum/on3-performance-llc/

http://www.theturboforums.com/smf/turbo-tech-questions-only!!!/feedback-about-on3-performance-wanted!!/

http://www.theturboforums.com/smf/the-modular-forum/on3-with-c4-crossover-problems/

http://www.theturboforums.com/smf/diy-and-junkyard-turbo-tech/on3-performace/

http://www.theturboforums.com/smf/turbo-tech-questions-only!!!/on3-vs-ponydown/

[SEB]

Kit with just piping & Intercooler go for $1400

HPX 60lb Injectors $350
PMAX Mass Air slot $200

Exhaust side for Turbo $200

So right at $2100 plus the Accufab TB. Right at $2500 in the kit new with all the parts.

If I cant get $1600 cash then I will just sit on it. I only have $200 of my own cash in this kit along with some BBK Longtubes & BBK Catted H-Pipe & some ported E7 Heads with 2.02 Valves & 1.60 Exhaust.

Just need to come up with some Injectors & mass air to give my buddy for his mustang

[Lone Sailor]

The guy that builds those has had some shitty dealings on Corral with those turbo kits. He got all bent when I started posting links in his for sale threads to threads in the classified feedback section that were calling him out on his asshatery.

[VaderTT]

The guy that builds those has had some shitty dealings on Corral with those turbo kits. He got all bent when I started posting links in his for sale threads to threads in the classified feedback section that were calling him out on his asshatery.

Yeah, his name is Chad and he is a complete piece of shit! He doesn't build them, he has the kits built and shipped by a company in china.

[SEB]

The guy that builds those has had some shitty dealings on Corral with those turbo kits. He got all bent when I started posting links in his for sale threads to threads in the classified feedback section that were calling him out on his asshatery.

I have read good & bad replys. Most of the bad are geared more about the V-band clamps, But with some RTV installed with the V-Band clamps they are a good bang for the buck. I def have seen more good replys then bad.

This a street turbo kit. If your wanting to make 600 RWHP. Then this isnt the kit to go with. But they are proven 450 RWHP bolt on setup on a Foxbody

Here is a link to a guy running one http://forums.corral.net/forums/turb...rbo-build.html

[Lone Sailor]

Yeah, his name is Chad and he is a complete piece of shit! He doesn't build them, he has the kits built and shipped by a company in china.

Oh, so he leads people to believe he actually builds them too? Nice!!

[Jimbo]

This was within 5min of searching on 1 site. Give me 20min and I could find hundreds.

I would take the offer of $1500. The kits are selling nib from private sellers for around 1k. seperate the kit and the pmas/injectors and sell them for around $4-550.

I was acctually thinking about picking one up and throwing it on a junker fox.
It would be Chad's (the retard) mild steel hotside
masterpower upgraded turbo
I'd take apart the WG and BOW to clean the metal shavings
and stock up on rtv for the poorly sealing v-bands.

http://www.theturboforums.com/smf/bs-(non-tech)-forum/on3-performance-llc/

http://www.theturboforums.com/smf/turbo-tech-questions-only!!!/feedback-about-on3-performance-wanted!!/

http://www.theturboforums.com/smf/the-modular-forum/on3-with-c4-crossover-problems/

http://www.theturboforums.com/smf/diy-and-junkyard-turbo-tech/on3-performace/

http://www.theturboforums.com/smf/tu...3-vs-ponydown/

I knew there had to be some one picking them apart somewhere. Thanks for the links.

[VaderTT]

Goods and bads about the kits, Chad just sucks and can not be trusted.

[DON SVO]

Goods and bads about the kits, Chad just sucks and can not be trusted.

Oh, so he leads people to believe he actually builds them too? Nice!!

Sounds like a certain member from Canada...