Anyone got a trashed 4.6 2v I could use for mach up?

[dville_gt]

Going to start helping my bro-in-law put the engine from his wrecked bullitt into his 65 fast back. He'd rather not strip the bullitt until he has the fab work done so he wants to pick up a cheap blown 4.6 2v to use for mach up purposes. Needs to have heads and oil pan. Doesn't matter if the heads are trashed or if it's got a blown piston, etc, just needs to be cheap.

Anyone got anything?

[2165 Turbo Rail]

is $500 cheap to him by chance? This is the ONLY way to go we used one while mocking up the GTO

http://www.summitracing.com/parts/PYP-3050/

[Cooter]

spectacular pun

[Tyrone Biggums]

I have a 2v block out of a 2000 GT that you can have DIRT cheap. It's got the oil pan, but no heads. Spun rod or main bearing. Never pulled it apart to find out what. It's just taking up space in the garage floor. Pm me if you're interested.

[Lason]

is $500 cheap to him by chance? This is the ONLY way to go we used one while mocking up the GTO

http://www.summitracing.com/parts/PYP-3050/

Well worth it, you would probably have $500 into a junk 2v and chiropractor bill otherwise.

[DFWtechie]

I have a cracked 5.4 block you have for 20.00 I was gonna scrap it. I think the motor mounts would be the same

[Darren M]

Do yourself a favor and get some big styrofoam, get the dimensions of the block, and make it out of foam. MUCH easier than lugging around a block and heads! Or, buy one.... Pricey but.... (assuming this is just for a rough in)

http://www.summitracing.com/parts/PYP-3050/?rtype=10

[Jimbo]

spectacular pun

lol, That is all I could focus on when reading. Freudian slip?

[Clifton]

I have a complete running 4.6l for $400. You can sell it when done and make some $$$.

[dville_gt]

What is it out of?

[Cooter]

lol, That is all I could focus on when reading. Freudian slip?

I couldn't even read/process anything else in the thread without anybody else acknowledging it! Thank you for helping to restore my sanity.

[badass88gt]

pm sent, i have one, intake to oil pan for 250.00

[badass88gt]

heads and everything still good, just a shit ton of miles

[ELVIS]

there is a working one from a 98gt in the classifieds. buy it for $600 use it to mock up then sell it. kinda like just renting!

god bless.

[Clifton]

there is a working one from a 98gt in the classifieds. buy it for $600 use it to mock up then sell it. kinda like just renting!

god bless.