9" rim on front of fox ??

[stretch]

how do u get a 9in rim on the front of a fox without it sticking out?

i have sn95 brakes up front. the rim sticks out past the fender maybe a 7/16 of an in. drive me nuts. any ideas ?

[MattB]

What is the offset of the wheel, and do you have 94/95 brakes up front or 96+?

[Z06killinsbf]

Doesn't the SN95 stuff push the wheels out further?

[stretch]

they are the 94-95 gt spindles.
the rims are 03 cobra anniv. (authentic off 03 cobra) 17-9s
would love to make the work ?

[MattB]

Doesn't the SN95 stuff push the wheels out further?

The 96+ stuff does, but not the 94-95. Not sure what the deal is. Maybe the 99+wheel offsets are a little more than the 94-98 wheels, but I can't remember. I had a buddy with 17x9 Cobra R's on the front of his 93 LX with 94-95 spindles and I don't remember them sticking-out at all, but I've drank since then!

[stretch]

it doesn't look to bad but its not the look i want. i will post a few pics as soon as i figure out this camera.

[greenbullitt]

you sure they arent 96-up? I have a 18x9 on my 94-95 spindles and they tuck on a fox

[stretch]

a few pics

[onjacks]

may be able to buy some adj a-arms for maximum motorsports to suck em up.

[stretch]

that was the 1st thing i double checked, made sure they were 94-95 not 96 up.

[Z06killinsbf]

Looks good to me, buy spacers for the rear!

[stretch]

it rubs on sharp turns now and i wanna lower it.

[majorownage]

it rubs on sharp turns now and i wanna lower it.

Hawt as is.


Lowering it makes it ride shitty.

You cannot ever correct the geometry if you use springs to lower it.

[stretch]

Hawt as is.


Lowering it makes it ride shitty.

You cannot ever correct the geometry if you use springs to lower it.

its a Fox, how is it suppost to ride? lol

[Damnittsteve]

looks fine, cant believe you are complaining about htat