Stock fox with longtubes.

[majorownage]

lol your a fucking idiot selfownage.mark viii had the factory option of posi.so all you had to take off was the passanger side spindle and cv axle huh i thought there was another axle that needed to be removed or am i wrong???

Nope. You are wrong.

[Diabolic]

Pulling the fp vacuum line off at the track will not pick up anything. The car looses vacuum at full throttle therefor doing the same thing as pulling line.
OBD1 does not learn like a OBDII does. It only knows it has a problem and will throw the light once it sees it everytime unless its a hard fault. But he will need to throw more fuel at it or get a tune to change the MAF tables to compensate for the lack of fuel .

and I know this. Fuck, that was my bad. Happens sometimes.

[Diabolic]

Mike you really do need a wideband. Just get an innovate LC1. Really do yourself a favor and get the LC! paired up with a Moates QH and a Lic Version if Binary Editor. That way you can see what works best for you and read the datalog info in real time.

[AMJ]

Nope. You are wrong.

so your sayin the left cv axle didnt have to be removed at all???

[majorownage]

so your sayin the left cv axle didnt have to be removed at all???

Slid the pumpkin sideways, away from the left axle.

[majorownage]

Entertain me with your pseudo-intelligent remarks please.

[crapstang]

Lol at you claiming to do it all yourself. First, most Marks came with trac locs. Second I highly doubt in fact know you didn't properly swap gears on your independent rear suspension car. And third you didnt tune your car yourself. You may have bought a handheld or taken it somewhere but you didnt tune it.

And the wiring is not easy. Its a simple pigtail you plug in. No wiring involved. Which leads me to believe youve never done it.

You, sir, are mad that he actually did it.

[crapstang]

Why do I need to read up on a piece of shit car that I have worked on before. Dumbass. And I dont believe you did your own gears. Again based on your stupidity and your comments.

That post sure sounds like the hurt butt of a loser

[mk5.0]

Nope. You are wrong.

sweet tool set...

[crapstang]

This is what it looks like before the job:

http://www.adafruit.com/adablog/wp-content/uploads/2010/08/tumblr_l5gdc5kqr71qbqgxwo1_500.jpg

After, but it's done right:

http://www.dominicktyler.com/images/editorial/guns-to-tools/01.jpg

[majorownage]

Everytime

Lol

[crapstang]

"Okay, my gears are in, I'm heading back to College Station, bye. BTW, can you clean up those tools?"

[G..]

You, sir, are mad that he actually did it.

I see no proof besides a car missing a spindle and axle out. I dont see and dial indicator or torque wrench or any supporting facts besides that handy dandy master tool set. lol

That post sure sounds like the hurt butt of a loser

Not at all. I could care less about some punk ass kids on here. Especially you two. Ive shit bigger turds than both of you.

[majorownage]

I see no proof besides a car missing a spindle and axle out. I dont see and dial indicator or torque wrench or any supporting facts besides that handy dandy master tool set. lol

Not at all. I could care less about some punk ass kids on here. Especially you two. Ive shit bigger turds than both of you.

Oh yes, because I'm going to REBUILD my pumpkin outside.

You are now officially 10x dumber than I thought.

[crapstang]

I see no proof besides a car missing a spindle and axle out. I dont see and dial indicator or torque wrench or any supporting facts besides that handy dandy master tool set. lol

Not at all. I could care less about some punk ass kids on here. Especially you two. Ive shit bigger turds than both of you.

You definitely do care...lol, yup you definitely needa torque wrench for taking bolts of, wise guy here
Why do you care so much anyways? I bet you don't have a car, I don't see any supporting evidence, because of your dumb post