Stock FPR has 2 Bolts instead of 3?

[SEB]

Never seen this before! I picked up a FPR for my Foxbody. Went to install it to find 2 bolts instead of the normal 3, I take it I will have to swap over to a fuel Rail with it setup for 3 bolts as I haven't seen a FPR with 2 bolt except the stock one that is on mine!

[Vertnut]

Never seen this before! I picked up a FPR for my Foxbody. Went to install it to find 2 bolts instead of the normal 3, I take it I will have to swap over to a fuel Rail with it setup for 3 bolts as I haven't seen a FPR with 2 bolt except the stock one that is on mine!

My '95 only has 2 bolts.

[OMEGA DOOM]

Never seen this before! I picked up a FPR for my Foxbody. Went to install it to find 2 bolts instead of the normal 3, I take it I will have to swap over to a fuel Rail with it setup for 3 bolts as I haven't seen a FPR with 2 bolt except the stock one that is on mine!

you got another foxbody?

[SEB]

you got another foxbody?

Its nothing special! Its a Beater

I must have a pullout motor from a 94-95 SN95 style mustang. Cause the fuel rails dont look the same either

Anybody have a 2 bolt Adjustable FPR they want to get rid of

[BlueCoupeRedVert]

What else are you doing to your car Seb?

Tonight I started taring my motor down to install new heads, roller rockers, new water pump, fix various leaks, and clean some shit up.

[white88]

I have stock foxbody rails with a 3 bolt Kirban FPR I'll hook you up with.

[SEB]

I have stock foxbody rails with a 3 bolt Kirban FPR I'll hook you up with.

Just bought a Kirban FPR & this is when I found out I had a 2 bolt style FPR! Not sure if I want to swap fuel rails or sell my Kirban FPR & just by a Adjustable FPR for the 2 bolt Rails I have now

[SEB]

What else are you doing to your car Seb?

Tonight I started taring my motor down to install new heads, roller rockers, new water pump, fix various leaks, and clean some shit up.

Just did some simple Bolt ons to try & improve Gas!

Trick Flow Alum UD Pullys
Electric Fan
1.7 Crane Rockers
Deleted EGR Spacer with 70mm plate to match my 70mm TB
1inch Stock Spacer between Upper and lower
Had no Thermostat & just put in Heater core & didnt blow that hot! Now 192 theremostat & drained Coolant & refilled with new coolant, (HOPE HEAT BLOWS HOT NOW!!!!!!
Smooth style stock Valve Covers repainted with my stock upper painted too
MSD Billet Dist
New FMS Wires
New Motor Mounts
1 3/4 Longtubes
3inch Pro Chamber
3inch Super 44s Dumped

Now sure how much faster its going to be with stock 3.08s out back!

Picked up a set of E7s that are ported with 2.02 Valves & new Springs for $150 & keeping my eye out for a Stock Explorer Intake that is cheap. But everyone wants top $$$ for their stuff it seems. So I will just wait till the right deal comes along.

Doug you doing Heads & Cam now with the Blower ?

[BlueCoupeRedVert]

Doug you doing Heads & Cam now with the Blower ?

Yeap. Had the cam,keepin' the e-cam. Got some procomp pc3038 aluminum heads. Got agreat deal on them. They are brand new.

[green1995gt]

I have a 2 bolt adjustable reg. Never been used. pm if interested

[SEB]

I have a 2 bolt adjustable reg. Never been used. pm if interested

PM Sent