Announcement

Collapse
No announcement yet.

Torque box failure? Video included.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Torque box failure? Video included.

    Ok, so for the last month I've been hearing a popping sound when I hit bumps and get In the throttle. But I couldnt replicate it until now.

    It doesn't make any sounds when going up and down but when I shake the car side to side, it pops.



    I know when they start to tear you can hear the contol arm bind and it makes a popping sound. Is this what that sounds like? I'll get under the car tomorrow in the day light and get a good look. Just seeing if this is what I'm looking at.

    so much for the cruise!

    320rwhp. 7.67 @ 90mph 1.7 60'

    DD: 2004 GMC Sierra VHO 6.0 LQ9 324whp 350wtrq

  • #2
    Just got underneath the car and the torque boxes are fine, but the control arm busings are toast. They are dry cracked and you can see clean steel on the control arm bolts.

    The lower control arms seemed to have been at an angle and were very close to touching the box on the outer side.

    So my question is, would dry cracked lower control arm bushings cause it to pop, like in the video? Seems plausible.

    I've made about 20 passes on slicks launching around 3000rpm, I have subframe connectors aswell. I would imagine from that abuse the boxes should still be fine.

    320rwhp. 7.67 @ 90mph 1.7 60'

    DD: 2004 GMC Sierra VHO 6.0 LQ9 324whp 350wtrq

    Comment


    • #3
      my car made similar noise/ my lca bushings were fucked...like free spinning in the control arm fucked LOL.....tubular lcas = issue solved. Id go ahead and have the tq boxes all welded up too

      Comment


      • #4
        This would probably help:

        Full time ninja editor.

        Comment


        • #5
          Why

          320rwhp. 7.67 @ 90mph 1.7 60'

          DD: 2004 GMC Sierra VHO 6.0 LQ9 324whp 350wtrq

          Comment


          • #6
            Originally posted by 91CoupeMike View Post
            Why
            I still have that guys number for the steeda LCAs
            Full time ninja editor.

            Comment


            • #7
              Originally posted by majorownage View Post
              I still have that guys number for the steeda LCAs
              No going to use steedas.

              320rwhp. 7.67 @ 90mph 1.7 60'

              DD: 2004 GMC Sierra VHO 6.0 LQ9 324whp 350wtrq

              Comment


              • #8
                What are you gonna do in the mean time? Drive with no bushings until you get some team z's?
                Full time ninja editor.

                Comment


                • #9
                  Originally posted by majorownage View Post
                  What are you gonna do in the mean time? Drive with no bushings until you get some team z's?
                  Hater.

                  No looking at SVE upper/lowers for mean time.

                  320rwhp. 7.67 @ 90mph 1.7 60'

                  DD: 2004 GMC Sierra VHO 6.0 LQ9 324whp 350wtrq

                  Comment


                  • #10
                    Originally posted by 91CoupeMike View Post
                    Hater.

                    No looking at SVE upper/lowers for mean time.
                    Let me know how they work for you. Been looking at a set for my project...
                    04 GT
                    91 LX

                    Comment


                    • #11
                      Mike, I have the rear end and the control arm bushing if you want them they are energy suspension and Prothane brand new. If you come to the cruise ill bring them ill let the go pretty cheap PM me if you do.

                      Comment


                      • #12
                        If I get the SVE arms I'll prolly get the rear end bushings off you.

                        I'll prolly just judo chop you and steal them with a swiftness, and then tell you, "I'd buy that for a dollar"

                        320rwhp. 7.67 @ 90mph 1.7 60'

                        DD: 2004 GMC Sierra VHO 6.0 LQ9 324whp 350wtrq

                        Comment


                        • #13
                          Originally posted by 91CoupeMike View Post
                          If I get the SVE arms I'll prolly get the rear end bushings off you.

                          I'll prolly just judo chop you and steal them with a swiftness, and then tell you, "I'd buy that for a dollar"
                          ok, lol

                          Comment


                          • #14
                            You might have to show him some gorilla strength Clint . LOl
                            Big Rooster Racing

                            Comment


                            • #15
                              Originally posted by dumpycapri85 View Post
                              You might have to show him some gorilla strength Clint . LOl
                              lol yes!

                              Comment

                              Working...
                              X