Clutch won't fully disengage

[jasonw_2005]

So I changed out the clutch on my 93 GT and it won't fully disengage. I'm fairly sure I reinstalled everything correctly. When I restabbed the tranny it went almost all the way in but stopped 1/4 of an inch shy of the bellhousing so I just tightened down the bolts and she snugged right up.i don't understand. Any tips would be greatly appreciated

[krazy kris]

oh snap

[Junioropolous07]

x2^

[Dacotua]

So I changed out the clutch on my 93 GT and it won't fully disengage. I'm fairly sure I reinstalled everything correctly. When I restabbed the tranny it went almost all the way in but stopped 1/4 of an inch shy of the bellhousing so I just tightened down the bolts and she snugged right up.i don't understand. Any tips would be greatly appreciated

Fyi: when you stab the tranny and it stops like that. Have someone push the clutch. The tranny will go in all the way one this is done.

You can break something by forcing it on with the bolts

Have you tried pulling up on the clutch pedal?

[jasonw_2005]

Fyi: when you stab the tranny and it stops like that. Have someone push the clutch. The tranny will go in all the way one this is done.

You can break something by forcing it on with the bolts

Have you tried pulling up on the clutch pedal?

Yes I have no effect

[mustangguy289]

Unstab the tranny. Then fap for a while.

[Matt]

Unstab the tranny. Then fap for a while.

[mustangguy289]

yes!

[03shadow4v]

Unstab the tranny. Then fap for a while.

Always talking about fapping.....

[46Tbird]

Is your cable adjustable?

Is the cable stretched or worn?

Is the cable correctly connected to the pedal, firewall, bellhousing, and clutch fork?