Tweet
I pulled a fuse out today and only half of it came out. The 2 legs are still in the fuse panel. When I test the fuse with the tester it shows power on both sides. Does that mean it is getting connection inside the panel?
-
-
sounds like it but it may not be making enough connection do you have a small pair of needle nose or something to get it out -
I dont think I am small enough to get in there. Is this something I should disconnect the battery before trying? Thanks!Comment
-
Try tweezers..Comment
-
-
Every fused I pulled out on the drivers floor board had no legs. WTF? I tried to dig out anything in there and nothing came out. So, I put a replacement fuse in and it only went halfway in. So I was able to troubleshoot that way.
BTW this is for a 2005 g35 sedan. I did have 2 fuses not showing power. One says start signal in the 'st' category and the other one says heater/mirror in the 'ign' category.
Any ideas? ThanksComment
Comment