Clicking in my mustang when turning

[SEB]

Thinking about replacing the whole A-Arm on the car so that way its all new upfront?

Can anyone suggest best place to get these from local so I can do this tommorow

[soap]

have that shit checked out,

i had a tie rod come undone scary shit.

[Big A]

have that shit checked out,

i had a tie rod come undone scary shit.

Horseshit, having one front wheel go hard left at 70mph is when the fun begins.

[soap]

Horseshit, having one front wheel go hard left at 70mph is when the fun begins.

God damn!!! I was only doing 35mph. And I shit myself. Lol

[SEB]

Ok, Car is at Alignment shop getting the following. I bought the parts & paid the shop $250 to install the following along with Alignment

All parts from NAPA
Front Response Sensa Trac Struts $65 each
Strut Mounts $35 each
Inner Tie Rods $20 each
Ball Joints $40 each

Total came to $300 even on parts

Labor is $250 with Alignment

So in short $600

Paid $2500 for the car, Investing $600 brings grand total to $3100. Im hoping it will ride smoother & steer tighter since I run Weld Skinnys up front

[mstng86]

What about the bearings?

[dville_gt]

This is my daily driver & my daughter rides in this car, I will get this fixed first thing tommorow.

I run Weld Skinnys up front

sorry, this made me lol

[SEB]

sorry, this made me lol

The skinnys actually feel pretty good at 70 mph cruising. I do alot of highway driving since my daughter lives in Scurry & my place is Royse City & my Girls place is Garland.

I went ahead & bought

Inner & Outer tie Rods
New Wheel bearings

Do the A-Arms have bushings in them. Since im not replacing the A-Arm maybe new bushings will help the handling and ride

[mstng86]

Do the A-Arms have bushings in them. Since im not replacing the A-Arm maybe new bushings will help the handling and ride

Yes.

[Steve]

The skinnys actually feel pretty good at 70 mph cruising. I do alot of highway driving since my daughter lives in Scurry & my place is Royse City & my Girls place is Garland.

I went ahead & bought

Inner & Outer tie Rods
New Wheel bearings

Do the A-Arms have bushings in them. Since im not replacing the A-Arm maybe new bushings will help the handling and ride

The front runners are unsafe bro. The first time you go to lock up the brakes at highway speed you're going to shit your pants when the car doesn't stop and even possibly folds the wheel over.

Find you some cheap pony wheels or something bro to keep you and your little girl safe.

[SEB]

The front runners are unsafe bro. The first time you go to lock up the brakes at highway speed you're going to shit your pants when the car doesn't stop and even possibly folds the wheel over.

Find you some cheap pony wheels or something bro to keep you and your little girl safe.

Point taken. I do alot of hwy driving & def need to be able to stop. I only get Aubrey every other weekend since she started school. (SUPER SUCKS, Gonna miss my days chilling with her) and I do drive my truck, But the truck has no AC or Heat so the stang will be the car I get her in!

Also my brake pads where almost down to the metal. Had those changed!

[Txstang1]

You probably need to replace both front cv axles :-)

Wheel bearings are my guess

[SEB]

You probably need to replace both front cv axles :-)

Wheel bearings are my guess

CV Axles are for FWD I thought

[MstangsBware]

CV Axles are for FWD I thought

Yes they are.......

On another note....Why the hell did you sell the GTP for an old Foxbody if you are using it for your DD?

[Big A]

I agree with Steve Sebastion, if you do a lot of highway miles, get some wheels/tires to replace the skinnies.