Electric water Pump sbf 302?s

[91CoupeMike]

like your really gonna notice that. im running 1.7 with a ecam

Noticeable or not, it needs help on the exhaust side.

Why not do it correctly?

[FoxBodyNick]

Agreed.

[turbos66coupe]

E7 heads need help on both sides. They don't flow for shit on either side. For "bank for buck modes". A letter cam is more than fine. Find a b cam and buy nicks heads and intake from him.

[turbos66coupe]

Or leave it all stock and take from someone who has been there and skip that shit and build a budget turbo build.

[91CoupeMike]

So no recommendations on electric water pumps?

As far as the gt40 swap, the reason I haven't done it already is because I don't think the money and time Spent is worth the results. 280rwhp on a good day. But I have a possible hook up on a wrecked v8 explorer. For free or cheaper then cheap.

[80coupe]

nope!

[SEB]

I run a Electric Waterpump on my LS1 with AC & daily drive it 70 miles one way with AC Running

I would be interested if a FOX 302 could run a Electic Water with AC, Im getting right at 25 mpg Hwy & 18 City, Im going to add Alum DS & BBK Longtubes with March Ram Air. I am going to really shoot for 30 mpg Hwy & 23 City, Im already running Weld Big & Little and fiberglass hood, Going to look in to dropping some weight off the car too or at least the front end for sure

[Txstang1]

I bet an elec water pump wont do anything for power. A short belt doesnt do shit for any noticeable power gains either, waste of money !!

[TENGRAM]

might as well put one of these on too...

http://www.jegs.com/i/Danny-Bee/294/2511/10002/-1?parentProductId=748229

[91CoupeMike]

I bet an elec water pump wont do anything for power. A short belt doesnt do shit for any noticeable power gains either, waste of money !!

Freeing up engine drag isn't a bad thing to do. IMO. Its not noticeable but it makes a differance.

might as well put one of these on too...

http://www.jegs.com/i/Danny-Bee/294/2511/10002/-1?parentProductId=748229

You laugh, and while I'd never ditch a chain for a belt, freeing up rotating mass isn't a shabby thing to do when building an engine, although I think those were made for the ease of changing cam degree.

[Z06killinsbf]

I'll sell you a powerstroke turbo and some mandrel u bends and various other turbo stuffs for cheaper than you can do all that other crap. Get you around 450rwhp.

[Sleeper]

Waste of money. You'll get more results with suspension mods.

Of course I never got rid of my clutch fan either haha

[lxturbo]

I'll sell you a powerstroke turbo and some mandrel u bends and various other turbo stuffs for cheaper than you can do all that other crap. Get you around 450rwhp.

Which turbo early 99 or late 99 or one from a 97 back ?

[Z06killinsbf]

Which turbo early 99 or late 99 or one from a 97 back ?

Errr..... I'm not sure. It's a non-VV turbo.