Tweet
So i had a little bad luck with my stang. Trannys done. I have a 95 mustang. Will a fox t5 work in the sn95. i have two t5s from my old fox and want to swap them out. i am tld that they are different. Has anyone done this and what is needed to make it work.
-
Nitrous is like a hot girl with an STD. You wanna hit it but your afraid of the consequences!
90 GT Carb 331, heads cam and a lot of bottle
95 Tbird SC forged 3.8, MPX supercharger, heads cam, and a little bottle
-
If you swap the input shaft they will work. -
Isn't the bell-housing different too? deeper?Originally posted by homealone View PostDoug
90 LX Coupe 5.0
90 7up Vert. 5.0
Comment
-
deep bell for sn input, shallow bell for fox input.Ring and pinion specialistComment
-
i would be interested in the other t-5first class white trashComment
-
The thing is i have a promotion cryo treated t5 that my buddy took out of a fox. he said that its for a 94-95 mustang. He claims that he put it in the fox with no changes to the trans. Can that be done. would it even work in the fox. he said he had to make room for the shifter. I was told that tremec came in foxes and borg warner came in the sn95. The housing says borg warner. Is there any way to tell by the numbers what it came out of. Sorry for all the questions. I am just trying to figure out what i am in for.Nitrous is like a hot girl with an STD. You wanna hit it but your afraid of the consequences!
90 GT Carb 331, heads cam and a lot of bottle
95 Tbird SC forged 3.8, MPX supercharger, heads cam, and a little bottle
Comment
-
Without swapping the input shafts you would need to use the corresponding bell housing. Fox trans, Fox bell, SN trans, SN bell. It works but you are moving the trans back and forth about 5/8".
Tremec took over the production of the T5 from Borg Warner so the later and post production units would be Tremec.
You can get the casting year off the side of the case. There is a circle with a year embossed in the side.Comment
Comment