Originally posted by Trick Pony
View Post
Announcement
Collapse
No announcement yet.
How quick will stock motor get me?
Collapse
X
-
I had a stock bottom 302 w/ edelbrock rpms, Nitrous NX274HR Street/Strip cam, Victor Jr. intake, and 750 demon on 150 spray and went 12.0s. Had cheap jegs upper and lowers and w/ 390 gears and 275 drag radials. Heads, intake, and carb where bought on the cheap on this site. I am sure with weight reduction and better suspention it might have run better. basically stock heads cam and intake suck. never made it outta the 13s with stock headsNitrous is like a hot girl with an STD. You wanna hit it but your afraid of the consequences!
90 GT Carb 331, heads cam and a lot of bottle
95 Tbird SC forged 3.8, MPX supercharger, heads cam, and a little bottle
Comment
-
Originally posted by TEAMJACOB View PostNot sure if its worth reading all 16 pages but there are so great gems mixed in there. This thread will never die. Its like the random picture of the day thread but instead its the random dumb shit mikes said today.
You're full of jokes!
320rwhp. 7.67 @ 90mph 1.7 60'
DD: 2004 GMC Sierra VHO 6.0 LQ9 324whp 350wtrq
Comment
-
Originally posted by stangstew View PostI had a stock bottom 302 w/ edelbrock rpms, Nitrous NX274HR Street/Strip cam, Victor Jr. intake, and 750 demon on 150 spray and went 12.0s. Had cheap jegs upper and lowers and w/ 390 gears and 275 drag radials. Heads, intake, and carb where bought on the cheap on this site. I am sure with weight reduction and better suspention it might have run better. basically stock heads cam and intake suck. never made it outta the 13s with stock headsAtlantic Blue '00 - '03 Cobra motor and TKO600, solid axle, full MM suspension
Silver '01 Vette - D1 blown LS
Comment
-
I actually owned a 91 LX Hatch back in 1997 that had stock heads and rockers, Explorer Intake, 65mm tb, E-Cam, FMS Shortys, stock H-Pipe without cats, 4.10's, no ac or ps, and I ran pretty consistant 12.9's with 1.7 60' times. That was with stock heads. Alamo Dragway in SanAntonio off Poteet Rd. Don't even know if that track is still open. It was pretty shitty even then.
Comment
-
Originally posted by Diabolic View PostI actually owned a 91 LX Hatch back in 1997 that had stock heads and rockers, Explorer Intake, 65mm tb, E-Cam, FMS Shortys, stock H-Pipe without cats, 4.10's, no ac or ps, and I ran pretty consistant 12.9's with 1.7 60' times. That was with stock heads. Alamo Dragway in SanAntonio off Poteet Rd. Don't even know if that track is still open. It was pretty shitty even then.
Comment
-
Originally posted by stangstew View PostI had a stock bottom 302 w/ edelbrock rpms, Nitrous NX274HR Street/Strip cam, Victor Jr. intake, and 750 demon on 150 spray and went 12.0s. Had cheap jegs upper and lowers and w/ 390 gears and 275 drag radials. Heads, intake, and carb where bought on the cheap on this site. I am sure with weight reduction and better suspention it might have run better. basically stock heads cam and intake suck. never made it outta the 13s with stock heads
Nevermind, just saw the radials part. I had good short times. Had slicks 90/10, 50/50, 4.10's, removed sway bar, 4cyl springs, full length welded subframe connectors. Stock control arms though.
This was back in the 90's, so the original motor was still pretty fresh.US Politics in three words - Divide and Conquer
Comment
-
Comment