How quick will stock motor get me?

[racrguy]

I dont even think my car will go 130. 5th gear is a turd.

Ill run the r/t from a dig to 100 or 20-120.

30 is fine if you want. FYI that's 3500rpm in 2nd for me. All I have to do is grab third and look in the mirror.

At what? Dude, your car is a stock fox, it's slower than a turd sliding down a greased wall. Get something that's reasonably quick (13's is not reasonably quick) then start trying to race people. Jebus.

[91CoupeMike]

At what? Dude, your car is a stock fox, it's slower than a turd sliding down a greased wall. Get something that's reasonably quick (13's is not reasonably quick) then start trying to race people. Jebus.

Agreed.

But mr. Stock dodge r/t is a 14 second car, high 13s at best.

4,000lbs at 345hp? Lol

[80coupe]

i dont think this thread will ever die!

[racrguy]

Agreed.

But mr. Stock dodge r/t is a 14 second car, high 13s at best.

4,000lbs at 345hp? Lol

3000 lbs at 195hp? Lol

[91CoupeMike]

3000 lbs at 195hp? Lol

300lbft @ 3000lbs

390lbft @ 4000+lbs.



Charger does the 1/4 in 13.9 @ 102.

They're not fast.

[matts5.0]

Quit magazine racing mike, dyno your car, get some slicks and take it to the track. Until then, shut up. You make yourself sound like an ignorant teenager with these type of threads and posts.

[91CoupeMike]

Quit magazine racing mike, dyno your car, get some slicks and take it to the track. Until then, shut up. You make yourself sound like an ignorant teenager with these type of threads and posts.

I've been to the track, charger r/ts are slower then I am.

Thats all I'm trying to say.

[Steve]

StupidCoupeMike strikes again... lol.

[Steve]

I've been to the track, charger r/ts are slower then I am.

Thats all I'm trying to say.

So when do you want to run the SRT8?

[91CoupeMike]

So when do you want to run the SRT8?

Whenever!

I got my rear end fixed so I'm reedy when you are.

[TEAMJACOB]

The whole problem with this thread is mike likes to say this car does that in the 1/4 or that car does this in the 1/8th when all he is refrencing is a google search. All that matters is what have YOU done in the 1/4 or 1/8th. Regardless of tires or slicks or spinning or not good suspension vs bad suspension etc etc etc etc. If you want to put up your best possible time with the power you make then make those changes. Finally, please stop going to track with street tires. That's like going fishing without a pole.

[91CoupeMike]

The whole problem with this thread is mike likes to say this car does that in the 1/4 or that car does this in the 1/8th when all he is refrencing is a google search. All that matters is what have YOU done in the 1/4 or 1/8th. Regardless of tires or slicks or spinning or not good suspension vs bad suspension etc etc etc etc. If you want to put up your best possible time with the power you make then make those changes. Finally, please stop going to track with street tires. That's like going fishing without a pole.

I went 8.97 in a bone stock fox. That was before I started to mod it. All it had was some wore out Nittos. 2.0 60ft. Problem was the 2.73s. No matter how hard I dumped it, it would fall on it's face.

With the 3:73s it should pick up a bit. Ever since the 3:73 swap I have a pile of 9.0 @ 80mph time slips on street tires (2.0 60ft) With some sticky tires I should get at least a 1.8 60ft.

[ELVIS]

this thread would be interesting if it was 1987.

god bless.

[Z06killinsbf]

Congrats, I ran 9.0's with an auto, 8.1 compression and 2.80 gear with a peg leg. I at least know I'm slow.

[TEAMJACOB]

So mike you are a 9 second car. Period