Just cause you get a good deal on labor

[Whiteboy]

Let's narrow it down, is it a shop that Carless Chris has worked at before?


: )

Yes

[Lason]

I bet I know who it is but I wont say. I say that because that shop did a gear swap for a buddy years ago and came back and developed a leak a few weeks later. We went to pull the cover and one of the bottom bolts was snapped off and the bolt head was just RTV'd on the cover.


That being said, since the natives want shop names. Stay away from EAGLE TRANSMISSION in PANTEGO!!!! That goat fucker put a tranny in my '96 Toyota Camry and about a month later I went to change the oil and noticed he only put half the god damn bolts in!! Half the bell housing bolts, half the k member bolts, the intake boot was torn and a few other things were broke or missing. I didnt care enough to raise hell because its a beater and all they would have done is say it was already missing.

[Mach1Run]

Holy crap that looks like I fixed it, which is the reason I now pay people to fix things.

[bonnie&clyde]

hey that just means that its getting a good seal lol

[Buick355]

Yes

Is the shop currently open and located in Dallas?

[Mach1]

Ouch, they actually had to crack(open up) the case to the tranny, thats not good

[Broncojohnny]

Those bellhousing leaks can be very serious...all your clutch fluid could leak out and then you would be stranded.

[Mach1]

Those bellhousing leaks can be very serious...all your clutch fluid could leak out and then you would be stranded.

Thats not the bell, thats the front of the case.

[Whiteboy]

Ouch, they actually had to crack(open up) the case to the tranny, thats not good

Thats just a bellhousing. The case was never open

[Whiteboy]

Thats not the bell, thats the front of the case.

Thats a bellhousing its a 6 speed not a 5spd

[cmltoe]

Doesnt mean you get good work. My 24k mile cobra was worked on by a shop
Before i owned it. I Went to swap the shifter out and found this today. Broken shifter bolt and a tube of orange sealent. The trans to bellhousing is covered in this orange shit as is the head cooling mod he had them install!





I do better work in my driveway.

I came to your shop a few months back and talked to you about a local shop that didn't put a bolt back in the differential cover. When I replaced the bolt I went ahead and replaced the fluid and found they didn't bother using a gasket to seal the cover.

[Whiteboy]

I came to your shop a few months back and talked to you about a local shop that didn't put a bolt back in the differential cover. When I replaced the bolt I went ahead and replaced the fluid and found they didn't bother using a gasket to seal the cover.

lol

[Mach1]

Thats a bellhousing its a 6 speed not a 5spd

Hrmm, guess its not a t56 then, i see a bell, the front of the case, rtv, then the rest of the case

[Daniel6718]

Thats just a bellhousing. The case was never open

it appears that that is the case that was opened? i can see the bell and trans where they meet and it appears to not be there.

this shop didnt install Notros did they?

I came to your shop a few months back and talked to you about a local shop that didn't put a bolt back in the differential cover. When I replaced the bolt I went ahead and replaced the fluid and found they didn't bother using a gasket to seal the cover.

Thats typical, most shops dont, it wont hurt anything, nothing wrong with it, but silicone doeent need to be globbed on.

[Lason]

Hrmm, guess its not a t56 then, i see a bell, the front of the case, rtv, then the rest of the case

I think its a adapter plate of sorts that goes between the tranny and bellhousing. I see the same thing you do.