Eibach drag spring, poly isolator questions.

[bpawl]

I did this over the weekend. I just jacked the front up as high as I could, then removed the control arm bolts with a big jack under the spring perch on the control arm. Lower the jack and the spring falls out. Reverse the process to install the new spring. No spring compressor needed.

[redrocket5.0]

I did this over the weekend. I just jacked the front up as high as I could, then removed the control arm bolts with a big jack under the spring perch on the control arm. Lower the jack and the spring falls out. Reverse the process to install the new spring. No spring compressor needed.

Now try that same process with a drag spring. You have to compress them, they are about 3 to 4 inches longer. Stock, or lowering spring yes.