Announcement

Collapse
No announcement yet.

Oil pan sensor plug?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Oil pan sensor plug?

    does anyone know what size the plug would be for the oil pan sensor? Or is there an oriellys part number?

  • #2
    This is what I need a plug for:

    Comment


    • #3
      I would just take that sensor up to a hardware or auto parts store and have them gauge it and then buy the plug or short bolt you need. Or if you don't have the sensor, go to an auto part store and have them look up the part and pull it off the shelf in the back, then figure out the thread size from there and you're good to go.

      Comment


      • #4
        Originally posted by Lone Sailor View Post
        I would just take that sensor up to a hardware or auto parts store and have them gauge it and then buy the plug or short bolt you need. Or if you don't have the sensor, go to an auto part store and have them look up the part and pull it off the shelf in the back, then figure out the thread size from there and you're good to go.
        That turned out to be a bunk deal. I'm hoping elliots hardware will be open tomorrow, they have a shitload of plugs/bolts/nuts etc.

        Comment


        • #5
          Are you just trying to plug the hole? If so, how about some redneck engineering and just JB weld the thing?
          Originally posted by Taya Kyle, American Gun
          There comes a time when honest debate, serious diplomatic efforts, and logical arguments have been exhausted and only men and women willing to take up arms against evil will suffice to save the freedom of a nation or continent.

          Comment


          • #6
            Its m20 or m22...honda drain plug should do it
            Ring and pinion specialist

            Comment

            Working...
            X