Twin-Cobraman's predicament !! Lsx turbo sn-95?

[Cobraman]

So today I picked up a Lazer red 96 cobra roller from Mr. Whiteboy. its got

Tubular k, a arms, subframe connectors, rear control arms, etc. all the suspension goodies. I have a couple options:

1. Swap the black interior from FOFISIX into the red car as well as any goodies from the black car. then selling Fofisix as a complete roller.

2. Swap the black interior from FOFISIX into the red car as well as any goodies from the black car. then selling the black car with tan/black interior motor, tranny, etc ( as a complete car) for $5k and buying some kind of motor and tranny combo ( Lightning, 03 cobra, mach 1, etc)( t-56, t-5) hell I'd even do a built and blown 5.0 fox motor. What about a Turbo LS motor?

what would you guys do?

[Stephen]

twin FO-FIVE-SIXES!!!

[71chevellejohn]

That's like NYN-TWELFS

[BlueCoupeRedVert]

wonder if a big block will fit?

[matts5.0]

lsx in the red car!

[91CoupeMike]

If you want to win, do a turbo 351 base engine.

YouTube

Boostedgt

/thread

[BlueCoupeRedVert]

lsx in the red car!

I like this idea w/ turbo!

[YALE]

wonder if a big block will fit?

They sell k-members for the swap.

[BlueCoupeRedVert]

who know what engine combo will fit with a mod motor tubular K-member?? will an ls1 fit?

[matts5.0]

who know what engine combo will fit with a mod motor tubular K-member?? will an ls1 fit?

it should?

[Cobraman]

it should?

I'd need a motor, turbo, trans, and it all running and working for $5000 or less. Possible?

[turbos66coupe]

Are you doing all the work? Fab etc. Because otherwise hell no unless its gonna a be apiece of junk. You might get a 5.0l, trans and turbo kit for close if you go fairly stock eng , t5 and a budget turbo kit on3 or other. You gotta have afuel system $$ and tune plus any k member mods etc . Idk what you are working with or what other stuff you have from "fofisix" but builds like that will nickel and dime you to death.

[71chevellejohn]

Which tubular k-member is in it?

[BlueCoupeRedVert]

Which tubular k-member is in it?

Qal 1

[YALE]

who know what engine combo will fit with a mod motor tubular K-member?? will an ls1 fit?

Again, there are k-members available for that specific swap. The way things are going, I wouldn't be surprised if there was one for the 2JZ sometime soon.