Rear end popping?!!

[91CoupeMike]

So I get out on the road. Rip 1st and second to hear a big ass pop, and at low speeds it pops, decel it does not pop and turning doesn't effect it.

Ive seen spider gears give out and pop while turning.

What kind of damage should I expect when I tear this apart?

Sa-weet it needed to be gone through and now I have a reason!

[91CoupeMike]

Highway speeds there is no noise and you cant feel it.

[dumpycapri85]

Did you look at your torque boxes ?

[80coupe]

Did you look at your torque boxes ?

X2 i need to do mine!

[91CoupeMike]

Did you look at your torque boxes ?

Not yet.. Could it be binding up?

[dumpycapri85]

Could be ripped and the sound is the control arm poping . Look them over real close .

[91CoupeMike]

Just took a quick glance and they looked fine. I checked upper and lower, grabbed the control arm and it feels fine.. I'll look them over better tomorrow though.

If I grab the wheel it will wiggle ALOT and you can hear it banging around in the diff.

If I hit the tire you can hear it banging too.

[80coupe]

you fuck up way to much shit!

[dumpycapri85]

You will have a little clunking in the diff and a little in and out motion put it should not be a ton . You could have a bad bearing or damaged the diff . You will have to pull it apart to know for sure . How are the u-joints .

[03shadow2v]

So I get out on the road. Rip 1st and second to hear a big ass pop, and at low speeds it pops, decel it does not pop and turning doesn't effect it.

Ive seen spider gears give out and pop while turning.

What kind of damage should I expect when I tear this apart?

Sa-weet it needed to be gone through and now I have a reason!

your picture is the reason its popping ...

[dumpycapri85]

your picture is the reason its popping ...

I would have to agree . Stock stuff can only take so much time and mileage .

[91CoupeMike]

You will have a little clunking in the diff and a little in and out motion put it should not be a ton . You could have a bad bearing or damaged the diff . You will have to pull it apart to know for sure . How are the u-joints .

6 mo old ford racing alum drive shaft. It's def not a u joint pop.

This rear end came out of a car I bought a while back, it's always whined a little. So anything is possible.

I think I broke a tooth on the ring or pinion gear. My guess...

Last week I was pulling onto the highway and I heard a loud ass pop, It sounded like I ran something over, but I didnt feel anything. Maybe it's related?

[91CoupeMike]

you fuck up way to much shit!

Have to have a car that runs to break stuff!

If it ain't broke you weren't having fun!

[91CoupeMike]

I would have to agree . Stock stuff can only take so much time and mileage .

Not going to argue that!

I'm suprised it lasted me this long!

Oh well!

If it is shot should I go 3.55 or go back to a 3.73?

[Z06killinsbf]

I've seen stock 5.0's break shit. Keep trying and the whole thing will be toast. Enjoy!