Fox wheel options.

[91CoupeMike]

The time has come for me to get new wheels, I currently have 4 lug, but I can do a mark 7 rotor swap and find another axle, I have 2 5 lug axles 1 fits perfect while the other has about 1/4 inch of wiggle. Not sure why.

Anyways..

I was thinking about Mach 1 wheels, will they fit on a fox? Backspacing?

I wouldnt mind some drag lites but I cannot find any for sale and buying anything new isn't in my budget.

Anyone on here have any 4 lug wheels with or without tires?

[Txstang1]

I just had my fox shoe'd. Still 4 lug, but now IDGAF.

[TENGRAM]

I have some chrome ponies with tires. The wheels are not in very good shape though.

[91CoupeMike]

Don't want ponies anymore. :/

[Magnimike1]

Fix that bumper cover first..

[homealone]

You wont be able to use the center cap on the Mach I wheels if you use Mark VII stuff. And depending on how the hub is made, the wheels may not fit at all.

[91CoupeMike]

Fix that bumper cover first..

3 of my 4 ponies are bent and my front runner separated last night out of no where..

So I need to get it drivable..

[slowyellow]

I just had my fox shoe'd. Still 4 lug, but now IDGAF.

Damn I didn't know they made 4 lug d-10's. Where did you get those?? Sorry for hijacking the thread

[Txstang1]

I bought them from a board member. I would assume bogart can make them in any lug pattern you want. My understanding is that each wheel
Is built to order.

[TENGRAM]

3 of my 4 ponies are bent and my front runner separated last night out of no where..

So I need to get it drivable..

If you get desperate, let me know. None of my ponies are bent. They have swirl marks from hell, could use a serious polishing, and have the typical loose center caps. All of the tires have good tread, though the front two should probably be replaced due to age. The back two are in great shape. I'll let'em go for cheap.

[91CoupeMike]

If you get desperate, let me know. None of my ponies are bent. They have swirl marks from hell, could use a serious polishing, and have the typical loose center caps. All of the tires have good tread, though the front two should probably be replaced due to age. The back two are in great shape. I'll let'em go for cheap.

Pm me a price

[my fear]

ive always liked the way 97 cobra wheels look on a fox. or you could get 93 cobra wheels, those look pimp as hell to. just some ideas.

[VaderTT]

The time has come for me to get new wheels, I currently have 4 lug, but I can do a mark 7 rotor swap and find another axle, I have 2 5 lug axles 1 fits perfect while the other has about 1/4 inch of wiggle. Not sure why.

Anyways..

I was thinking about Mach 1 wheels, will they fit on a fox? Backspacing?

I wouldnt mind some drag lites but I cannot find any for sale and buying anything new isn't in my budget.

Anyone on here have any 4 lug wheels with or without tires?

My friend has some 17" crome pony R's he wants to sell.

[slowyellow]

I bought them from a board member. I would assume bogart can make them in any lug pattern you want. My understanding is that each wheel
Is built to order.

So... whenever you are ready to sell them, let me know.

[91CoupeMike]

ive always liked the way 97 cobra wheels look on a fox. or you could get 93 cobra wheels, those look pimp as hell to. just some ideas.

Ive got a hook up on some 97 cobras. I'm going to get them and sit on them until I get the 5 lug swap sorted out.

I want to run sn95 hubs and spindles with the 13 inch rotor but I see foxes with that set up and the wheel/tire sticks out a inch from the fender. Don't want that.

I heard the fox control arms are shorter and idk If those people are running sn95 control arms or not.