any cast piston guys using nitrous?

[Damnittsteve]

or am i the only one dumb enough to think it'll be ok. car is a 86ish shortblock with non forged passenger style pistons. got a holley650, Heads and cam, dual plane motor sport intake, and full exhaust. basic 300rwhp setup. i was thinking a 50-100hp shot would be safe as long as i dont get greedy, knock down the timing, colder plugs and run a microswitch. im also switching to automatic so i can stop missing gears and hitting the damn limiter on the 6al.

what do you recommend?

[Cooter]

your pistons are forged

[Damnittsteve]

your pistons are forged

are you sure? remember they are these 86-91 non ho pistons. everyone so far has told me they are cast. are you saying they are forged? hell id be happy with hyperutetetic

[Cooter]

yes, they are forged

[Damnittsteve]

yes, they are forged

sweet! than what nitrous setup would you recomend for my combo?

[Cooter]

two bottles...

[Damnittsteve]

two bottles...

big ones?

[Cooter]

big ones?

obv!

[Damnittsteve]

obv!

and i need them by tonite. nitrous isnt for amatures lol.

[Turbosvo]

Lol

[dumpycapri85]

With a 100 shot you don't need to worry about plugs but I would back the timing down to 10 and start from there but only when you are on the spray . Run it , listen and look , then up the timing as able . This is the reason Mike , Dale and myself run the dig6 so we can back the timing with a dial that only activates on the spray so its not dogy off it .

[helosailor]

Do it!

[Josh.0]

I didn't know you replaced that other carb with a holley.

[dumpycapri85]

He didn't .

[80coupe]

Do it!

yes, lol!