Tweet
Staying pumped up or not pumping at all. I don't really know what to look for at first it sounds like a rocker arm but I check all of them and their fine. What are some things to look for to find out if this is the problem?
-
-
if you can collapse the lifter by hand (pushing the pushrod down) they are bleeding off/not pumping up. One of the two...Originally posted by 80coupe View PostRing and pinion specialist -
-
would this relate to my current issue?? idk if its an exhaust leak or a bad lifter/rocker arm cuz when i accelerate i hear a loud constant tick noise,, from the right side.... dont hear it if im just cruising at a set speed... just during revs/accelerationsigpic
92 GT, 5 Lugged, 306, Vortech V1 S Trim, 42# injectors, Aeromotive Boost Reference Fuel Pressure Regulator, MSD Boost Timing Master, TKO 600, Moser 31 Spline Axles, 3.73's.Comment
-
if its a tick you got a exhaust leak, you will know when its a rocker arm it will run like shit if its bad!Comment
-
Exactly, Ive experienced bothOriginally posted by 80coupe View PostBig Rooster Racing
85' Coupe
sigpicComment
-
i should have got lifter along time ago when i was going to but i didnt!Originally posted by carbd89sleeper View PostComment
-
Hopefully not a flat, flat tappet cam!Comment
-
-
I am not familiar with your shortblock. Is is a roller cam block or hydraulic flat tappet? Then again if that were the case, one of the rockers would be loose. But it would suck because you could not put a new lifter on a used flat tappet cam.Originally posted by 80coupe View PostComment
-
its a roller motor!Comment
-
That is good! lol! Do you have roller rockers! I am just trying to dig out a little more info. on your setup!Originally posted by 80coupe View PostComment
-
Comment
-
yes 1:7s, itsNOTfor sale!
Comment
-
Maybe one of the rockers could have a bad trunion also.If they aren't shimmed correctly it will make them noisy also. Pm me what you are asking.Originally posted by 80coupe View Postyes 1:7s, itsNOTfor sale!Comment
Comment