would this work in a 85stang with a 302/c4 combo?

[Damnittsteve]

says 66-68mustang but i think it will work as an alternative to the lokar cable. what do you think?

http://macsautoparts.com/mustang-automatic-transmission-kick-down-cable-kit-9-pieces-6-cylinder-289-302-v8-with-c4%3Cbr-%3E-c6oz-7a187-kt/camid/MUS/cp/7L0H7BDL1000025/

[Damnittsteve]

or do i have to buy this?

http://www.jegs.com/i/Lokar/625/KD-20C4HT/10002/-1?parentProductId=749856

[Damnittsteve]

btw, this is for the downshift linkage so i dont have to manually downshift on the hwy

[homealone]

First one will not work. That cable works on conjunction with a fulcrum/equalizer bar attached to the intake for the carb linkage.

The second one is a waste of money IMO.

Run down to the junk yard and pull a kick down bar off a 70s-80s car/van/truck.

SOmething like this. You will need to find one that clears your firewall, etc.

[Cooter]

doesn't the TV increase line pressure also? are you running around with nothing to modulate line pressure?

[homealone]

doesn't the TV increase line pressure also? are you running around with nothing to modulate line pressure?

Pretty sure the C4s don't use a TV system. The kickdown is a kickdown. Are ya snoozin Forest?

[Magnimike1]

I thought Dumpy said he had several kickdown bars...

[homealone]

On second thought, buy the first one. When it gets here I'll buy it from you at a reduced cost.

My 67 needs one.

[80coupe]

I thought Dumpy said he had several kickdown bars...

We made one for my car and it works pretty nice!

[Z06killinsbf]

Ya the first one is kind of a waste as well, you could easily make that too. I may have mine laying around somewhere. Thank you PA for making my trans Non-kickdown compliant.

[Damnittsteve]

I thought Dumpy said he had several kickdown bars...

he said it wouldnt work with my carb.

[Magnimike1]

But one works with Clint's holley? That doesn't make any sense. Your's is more or less a holley. You just need the additional bracket if I am not mistaken.

[80coupe]

But one works with Cint's holley? That doesn't make any sense. Your's is more or less a holley. You just need the additional bracket if I am not mistaken.

mine was carb so i used pieces of the old one!

[Damnittsteve]

But one works with Clint's holley? That doesn't make any sense. Your's is more or less a holley. You just need the additional bracket if I am not mistaken.

u mean this?

http://www.oreillyauto.com/site/c/detail/EDB0/1483.oap?ck=Search_1483_-1_-1&keyword=1483

[Josh.0]

Should have bought a holley LOL