Where to go for 4" mandrel pipe?

[dville_gt]

I need at least one 90* mandrel pipe for a intake pipe. Doesn't need to be fancy material or anything. Where local sells this?

[dutchboy]

dynosaur in saginaw stocks all that stuff...

[Cooter]

any truck supply

[Lason]

Ogburns Truck Supply in Ft Worth

900 East Northside Drive, Fort Worth
(817) 332-1511

[d1tko]

Ogburns Truck Supply in Ft Worth

900 East Northside Drive, Fort Worth
(817) 332-1511

x2
talk to Brian ,he will hook you up.!

[turbostang]

If it's just one, I might have it. IF not, Ogburns is where I get all that stuff.

[dville_gt]

Ya, I just need one, it is for an inlet pipe. I made one out of (hangs head in shame) pvc right before the cruise since my IAT were showing something like 180* in 85* weather when i had the filter mounted directly to the MAF (which is attached to the t/b via a 90* silicon elbow (which I guess could be an option instead of a section of pipe).

I come out of the t/b with a silicon 90 towards the driver fender, maf mounted to the silicon, then a section of pipe to bring it all the way towards the frame rail, then a 90 that drops the filter down just level with the bottom of the core support.

[turbostang]

Ya, I just need one, it is for an inlet pipe. I made one out of (hangs head in shame) pvc right before the cruise since my IAT were showing something like 180* in 85* weather when i had the filter mounted directly to the MAF (which is attached to the t/b via a 90* silicon elbow (which I guess could be an option instead of a section of pipe).

I come out of the t/b with a silicon 90 towards the driver fender, maf mounted to the silicon, then a section of pipe to bring it all the way towards the frame rail, then a 90 that drops the filter down just level with the bottom of the core support.

Necessity is the mother of invention.

[2165 Turbo Rail]

Don't be ashamed Brian shearer ran PVC on hit twin turbo set up when the fairmont was first but went from the turbos into a Y then to a bonnet on the carb It worked

[dewayne6243]

Ya, I just need one, it is for an inlet pipe. I made one out of (hangs head in shame) pvc right before the cruise since my IAT were showing something like 180* in 85* weather when i had the filter mounted directly to the MAF (which is attached to the t/b via a 90* silicon elbow (which I guess could be an option instead of a section of pipe).

I come out of the t/b with a silicon 90 towards the driver fender, maf mounted to the silicon, then a section of pipe to bring it all the way towards the frame rail, then a 90 that drops the filter down just level with the bottom of the core support.

I have one. Where are u located?

[dville_gt]

i'm in n. arlington, but im going to be heading down 30 to weatherford on saturday. how much do you want for it?