Announcement

Collapse
No announcement yet.

2003 cobra water pumps??

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 2003 cobra water pumps??

    Why is a 10th anv water pump taller?

    320rwhp. 7.67 @ 90mph 1.7 60'

    DD: 2004 GMC Sierra VHO 6.0 LQ9 324whp 350wtrq

  • #2
    huh?
    Ring and pinion specialist

    Comment


    • #3
      I knew Autozones computers were wrong.

      Had a guy call in for one and it asked me, because the two had differant part numbers. ???

      Told the guy they looked differant and I wasn't sure why.

      320rwhp. 7.67 @ 90mph 1.7 60'

      DD: 2004 GMC Sierra VHO 6.0 LQ9 324whp 350wtrq

      Comment


      • #4
        Originally posted by 91CoupeMike View Post
        I knew Autozones computers were wrong.

        Had a guy call in for one and it asked me, because the two had differant part numbers. ???

        Told the guy they looked differant and I wasn't sure why.
        They are wrong on a lot of stuff. Like u joints for fox bodies is one that comes to mind. And blower motor resistors for newer Chevy trucks.
        68 Coupe- 351w, TFS heads, Comp XE284, 5 speed, Explorer 8.8, 4 Wheel Discs
        63 Fairlane


        Originally posted by forbes
        i call 1911 first then 911

        Comment


        • #5
          The u joints pulls 4cyl part numbers, well it used too. They fixed that one, pulls 4800 joints now, which I believe Is correct.

          320rwhp. 7.67 @ 90mph 1.7 60'

          DD: 2004 GMC Sierra VHO 6.0 LQ9 324whp 350wtrq

          Comment


          • #6
            There's a few parts on fox body's it'll ask if it's 4wd or not.

            Lol!

            320rwhp. 7.67 @ 90mph 1.7 60'

            DD: 2004 GMC Sierra VHO 6.0 LQ9 324whp 350wtrq

            Comment


            • #7
              there are 2 different w/p for a 4.6... either its a short snout or long..... cobras would be the short
              sigpic

              Comment


              • #8
                Also if you try to look up rear rotors on SN95 Mustang GT or V6, it will always ask if it's vented or solid rotor when vented only came on Cobras.
                68 Coupe- 351w, TFS heads, Comp XE284, 5 speed, Explorer 8.8, 4 Wheel Discs
                63 Fairlane


                Originally posted by forbes
                i call 1911 first then 911

                Comment


                • #9
                  Originally posted by OsoSlow View Post
                  there are 2 different w/p for a 4.6... either its a short snout or long..... cobras would be the short
                  Early 4.6 (non Pi) had the tall pump right?

                  320rwhp. 7.67 @ 90mph 1.7 60'

                  DD: 2004 GMC Sierra VHO 6.0 LQ9 324whp 350wtrq

                  Comment


                  • #10
                    Originally posted by 351Coupe View Post
                    Also if you try to look up rear rotors on SN95 Mustang GT or V6, it will always ask if it's vented or solid rotor when vented only came on Cobras.
                    Yep I have noticed that too.

                    320rwhp. 7.67 @ 90mph 1.7 60'

                    DD: 2004 GMC Sierra VHO 6.0 LQ9 324whp 350wtrq

                    Comment


                    • #11
                      the vented are larger dia too
                      Ring and pinion specialist

                      Comment

                      Working...
                      X