Announcement

Collapse
No announcement yet.

Best place to find a T5 out of an S10 with the 4.3 ?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    There is a guys that parts S-10s in Florida I bought a tranny from on ebay. I was looking for his store, and I found this :

    Comment


    • #32
      Originally posted by CRASH View Post
      Ok, so I have a WC T5 out of a Early '90's Camaro that I'm going to use in my Chevy pickup.

      What I need is a T5 parts tranny out of an S10 pickup that had a 2.5 4 banger or 2.8 V6.

      I'm wanting to change the tailshaft and shift rail/forks to move the shifter forward to work with my bench seat. Where the shifter is now, it comes out under the front edge of the seat and that won't work.

      Anyone have, or know where I can get, a T5 from an S10 ? I don't want to spend a bunch of money on a good transmission, because I'm just going to be robbing parts off of it. I've checked Craigslist and haven't found anything that will work.

      Any transmission shops I should check that might have the parts I need ?

      -Aaron
      I can get you the housing, shift rail and shift selector if thats all you need. Do you need a mechanical or electric speedo setup? There are two different housings.

      Comment


      • #33
        Originally posted by thesource View Post
        I can get you the housing, shift rail and shift selector if thats all you need. Do you need a mechanical or electric speedo setup? There are two different housings.
        Awesome ! I would prefer the earlier housing with the mechanical speedo since it's going in a '66 Chevy truck and I'd like to be able to hook the speedo up.

        You're not in the D/FW area, are you ?

        -Aaron

        Comment

        Working...
        X