Mufflers and exhaust

[4EyedTurd]

Finally got the fox going and the dronemasters must go. I know it doesnt help that it doesnt have tailpipes. I have some stock tailpipes that are supposed to fit a fox and they either don't or I've gone full retard. My questions : are the mufflers supposed to be offset inlet/offset outlet? Any parts store mufflers quieter than the flowbastards and worth putting on? Does anyone have pics of how the tailpipes route?

[dumpycapri85]

Yes they should be off-set in and out .

[shumpertdavid]

I'm happy with the dynomax super turbo's, great flow rating and quiet down the rode.

[Blue88Coupe]

I'm happy with the dynomax super turbo's, great flow rating and quiet down the rode.

did you pay 71$ per muffler?

[greenbullitt]

Yes they should be off-set in and out .

should be center in if I recall correctly

[4EyedTurd]

Are the tailpipes supposed to run on the outside of the upper control arm?

[LS1Goat]

Tip: When I dumped my 2 chamber 40 series Flowmasters it virtually eliminated the drone. It just made bass and a lot of cab noise, but no drone in the rpm range that typically produces drone. And this was with FRPP shorties, Pypes o/r H, Flows turned down at axle.

And every Flowmaster muffler for a Fox based Mustang that I've seen is always offset/offset.

[greenbullitt]

Are the tailpipes supposed to run on the outside of the upper control arm?

yes

[greenbullitt]

And every Flowmaster muffler for a Fox based Mustang that I've seen is always offset/offset.

i stand corrected, the earlier (non fox) had ctr out...

[turbos66coupe]

Putting dumps on will help a lot to reduce drone. As well I had friend that new a muffler guy and put some 12" glass packs in front of the mufflers like resonators and it made a huge difference and took all the drone out. Its sort of a taste thing though cause ading two glasspacks in th h/x pipe may not be for everyone

[Cooter]

should be center in if I recall correctly

WHAT!?!?!?

if you want drone free performance, see if you can squeeze a pair of hemi-turbos under it. not sure if they'll fit a fox mustang, but they'll definitely fit other foxes

[greenbullitt]

WHAT!?!?!?

if you want drone free performance, see if you can squeeze a pair of hemi-turbos under it. not sure if they'll fit a fox mustang, but they'll definitely fit other foxes

i recalled it dammit! they dont make mufflers in offset configurations for my fox its been a while!

[Cooter]

hmm... do you have an Audi Fox?

[greenbullitt]

hmm... do you have an Audi Fox?

lol, no

[Cooter]

I'm lost... I've owned every fox body and they certainly make offset/offset mufflers for them!