Need help - electric fan install/conversion on a fox

[Txstang1]

Ok, here's where I'm at. I just bought a new alum radiator and this thing is huge, so big the the mark VIII elec fan I have will not fit.

The fan is about 5.5 in deep and I only have 4.5 in of clearance between the rad and the water pulley. SO obviuosly this fan isnt going to work.

I've done a little reading up on the net and it looks like some people are using the 95-2000 ford focus dual fan setup. They are supposed to be about 3.25-3.5 in deep, but I cant find any CFM specifications or anything other than than.

What other options are available for my setup? its a 351w with a 2 1 1/4 in row radiator. THe focus fan is $338 from the ford house and I dont want to spend that kind of money unless I'm posistive it will do what i need.

I want the MOST CFM that I cant fit in there, I want to be cool at the redlight when it 100 degrees out this summer.

TIA, My car is sitting until I figure out a solution.

[greenbullitt]

3.8 taurus single from around a 93 model...trust me, they work. Theyre right up there with a mark but not as deep.

[Your Name Here]

Reverse polarity and use it as a pusher????

[Your Name Here]

3.8 taurus single from around a 93 model...trust me, they work. Theyre right up there with a mark but not as deep.

They pull serious amperes at start up

[Txstang1]

3.8 taurus single from around a 93 model...trust me, they work. Theyre right up there with a mark but not as deep.

looking into now, thanks.

ANyone know of a good website that has fan diminsions and CFM ratings ?

[Txstang1]

Reverse polarity and use it as a pusher????

I dont follow ?

[Your Name Here]

I dont follow ?

Placing it in front of the radiator instead of behind in a traditional fashion. Make the Fan push air threw radiator instead of pulling threw

[Your Name Here]

http://www.flex-a-lite.com

[Txstang1]

3.8 taurus single from around a 93 model...trust me, they work. Theyre right up there with a mark but not as deep.

Does it look like this one?

[Txstang1]

Placing it in front of the radiator instead of behind in a traditional fashion. Make the Fan push air threw radiator instead of pulling threw

that's what I thought you meant. Yea, that wont work because of the ac condensor. thanks though.

[Your Name Here]

I'm gonna look around the shop I think I have one of those setups.

[Your Name Here]

Nah its for a old Honda dual setup 12" and a 10"

[Txstang1]

thnaks for looking.

[greenbullitt]

Does it look like this one?

exactly. I usually get used ones for around 50

[Txstang1]

exactly. I usually get used ones for around 50

ok, thankks for the tip. I need to go look at one and make sure its not too deep.