So it begins, Project CMC Mustang

[KBScobravert]

k-member, frt lower control arms, rear upper and lowers, springs, shocks/struts went to scrap...........all 4 discs and brakes plus spindles went to Brooks for helping me out.

I do have a ABS pump (30k miles) that I could donate to the cause if he wanted to put it on the car. I have a few harnesses that I could pull the ABS section out of plus the ABS control module to go with it.

[Mach1]

k-member, frt lower control arms, rear upper and lowers, springs, shocks/struts went to scrap...........all 4 discs and brakes plus spindles went to Brooks for helping me out.

I do have a ABS pump (30k miles) that I could donate to the cause if he wanted to put it on the car. I have a few harnesses that I could pull the ABS section out of plus the ABS control module to go with it.

Can't run ABS in the class, I appreciate the offer though! I do need some cobra brake parts, I have some calipers but no caliper brackets, guess brooks would have them now

I plan on putting the screen name of everyone who donates on the car somewhere.

[turbostang]

LOL, all of those parts are still sitting on my shelf waiting for the right 'project' car to come along.

[Mach1]

LOL, all of those parts are still sitting on my shelf waiting for the right 'project' car to come along.

Lol, maybe I can borrow the brackets until I get stop techs(prob mid 2014)

[Mach1]

Cool. I thought maybe you needed one for class rules.

I do need one for class rules but I don't want to even trade the hardwood for a stocker.

I might have a stock hood...need to see if its still at my moms house in E. TX but if I can get it I'll let you know.

That would be awesome, let me know.

[MattB]

I know a thing or two about turning left and right if you ever need a hand! I might have a few things you need as well.

[Mach1]

I know a thing or two about turning left and right if you ever need a hand! I might have a few things you need as well.

Good deal, thanks!

E-Cam has been purchased, thanks SEB!

[SEB]

Good deal, thanks!

E-Cam has been purchased, thanks SEB!

Cant wait to see the beast up & running!

[Mach1]

Cant wait to see the beast up & running!

I dunno about beast, but thanks for the vote of confidence!

[bird_dog0347]

If you want, I have a set of SN-95 tubular control arm with poly bushings I don't need... Not sure on brand, but let me know if you can use them and we can work something out.

[Mach1]

If you want, I have a set of SN-95 tubular control arm with poly bushings I don't need... Not sure on brand, but let me know if you can use them and we can work something out.

Thanks for the offer but I am class restricted to OEM control arms only :'(
These ugly beasts

[bird_dog0347]

Ahh, sorry, I don't have any of those. But I'd suggest at a minimum put in some poly bushings... not that hard, I just did it a few weeks ago.

[Mach1]

Ahh, sorry, I don't have any of those. But I'd suggest at a minimum put in some poly bushings... not that hard, I just did it a few weeks ago.

I am planning on running the offset delrin bushings

[Baron Von Crowder]

Ahh, sorry, I don't have any of those. But I'd suggest at a minimum put in some poly bushings... not that hard, I just did it a few weeks ago.

Pm me on those tubular arms

[jw33]

What do they typically run with the rear suspension setup?