Air to water?

[d1tko]

http://www.frozenboost.com/water-to-air-heat-exchanger/air-to-water-heat-exchanger-p-1026.html?osCsid=f2ae980238c8d75abcb4efc2ce32b3b5

[KBScobravert]

http://www.frozenboost.com/water-to-...b4efc2ce32b3b5

About $100 more than I will have in mine using this radiator piece.

[KBScobravert]

Got it all ready to be welded up.

Converred to dual pass.



Simple cut and built a plate to slide in dividing inlet water and outlet. Of course it is not 100% but 99% will do.


built caps for both sides. I angled the inlet side to match the opposing end.


This piece fits flush inside and I might trim the angled one to do the same.

once we tig a couple tacks on the easy side, I can push the other in to weld it all up.


I also cut off the filler cap and the hose connection then just made 2 round piece that drop in to close them up.

Tomorrow I'm having a cover bent to cover the section of fins I trimmed and give it a finished look then it gets all welded up.

Once my

[Matt]

Got it all ready to be welded up.

Converred to dual pass.



Simple cut and built a plate to slide in dividing inlet water and outlet. Of course it is not 100% but 99% will do.


built caps for both sides. I angled the inlet side to match the opposing end.


This piece fits flush inside and I might trim the angled one to do the same.

once we tig a couple tacks on the easy side, I can push the other in to weld it all up.


I also cut off the filler cap and the hose connection then just made 2 round piece that drop in to close them up.

Tomorrow I'm having a cover bent to cover the section of fins I trimmed and give it a finished look then it gets all welded up.

Once my

You didn't finish what you were saying. im stuck on a cliff hanger here man

[Z06killinsbf]

C'mon! Out with it!!

[KBScobravert]

Oh hell it cut my post.

Sent from my SAMSUNG-SM-G890A using Tapatalk

[Matt]

and you know i have a sheet metal brake right

[KBScobravert]

and you know i have a sheet metal brake right

yep. I was eyeing it the other night

[KBScobravert]

thanks Matt

holds pressure