97 Cobra LSx Build Thread

[Cobraman]

Don't forget the little stuff, if the truck pan actually clears the K-Member, it hangs low. Replacing or modifying it may be necessary. Will the truck intake fit under the hood? If you choose a car intake, it requires a different or modified harness, fuel rails and it needs a regulator. Are you going to diet the harness yourself or buy one? You'll need to flash the computer to omit the anti-theft and transmission as a minimum. You'll find out that the few fuel fittings you need aren't exactly cheap.

all of this is taken into account. I didnt have time to post the whole list. Everything I've seen says that everything should fit. I've got help with a lot of stuff and ill get a tuner to fix the anti theft

[naynay]

I've got a 6.0 intake throttle body, intake injectors and fuel rail if anyone needs them. Going carb on this motor I have.

[Cobraman]

Pulled the k member and rack out today. Pics to come later.

[Blackpony]

I've got a 6.0 intake throttle body, intake injectors and fuel rail if anyone needs them. Going carb on this motor I have.

Pm me how much you want. Have a friend needing all of this.

[line-em-up]

Lol, a tubular k member was unnecessary.

I'm trying to decide if that guy in your sig is Bull Nye the Science guy or David Byrne from The Talking Heads.
Awww oh. Watch out! You might get what you're after.

[2165 Turbo Rail]

Sub'ing can't wait to see this running


Sent from my iPad using Tapatalk - now Free

[BlueCoupeRedVert]

Sub'ing can't wait to see this running


Sent from my iPad using Tapatalk - now Free

You should come help work on it when we put motor in..

[2165 Turbo Rail]

When where

[BlueCoupeRedVert]

When where

Will keep you posted.

[fastwhite99gt]

Bah, my 190k mile 5.3 turns 6400 on a regular basis. It's made several trips across Texas at 3700rpm from Texarkana to El Paso with my trailer and a car behind it, averaging 80mph. Don't be scared to spin it on up!

[Cobraman]

Bah, my 190k mile 5.3 turns 6400 on a regular basis. It's made several trips across Texas at 3700rpm from Texarkana to El Paso with my trailer and a car behind it, averaging 80mph. Don't be scared to spin it on up!

if it were bolt on I'd rev it. 15lbs of boost is a different story

[Sleeper]

the 4.8's like ro rev. I wouldnt be afraid to run a 5.3 to 6500 either. What turbo?

[chevyboy523]

I've always liked those body styles

[Cobraman]

Pulling the k member with the help of dad and bcrv









Today I have been working on cleaning and painting engine bay. It's no onjacks job, but it is coming along well.


Finished.

[Cobraman]

the 4.8's like ro rev. I wouldnt be afraid to run a 5.3 to 6500 either. What turbo?

on3 70mm w/ .96ar