Announcement
Collapse
No announcement yet.
Rebuild/ up grade my 8.8
Collapse
X
-
Nice. I plan on doing this eventually with mine since i have c clip eliminators. Saved the pics where to cut. I got rings from chris neighbors on the corral to make up the difference on the axle ends so the disc doesnt just use the studs for centering if staying with a fox axle end.
Leave a comment:
-
Converted another rear brake system. Here is a side by side pic of how i cut the brake bracket..
Bolted to housing..
Last edited by BlueCoupeRedVert; 03-24-2015, 09:00 AM.
Leave a comment:
-
Originally posted by Sleeper View PostBeef up any mounting holes with sypherical bushings. They will get elongated.
I actually wore a couple of the bushings out. Well i egged them out with only 300hp 400 with the bottle. They sent me replacements for free. This was something like 5 years after of street abuse as a daily.
I didnt ask for it they just asked for my addy.
Leave a comment:
-
Beef up any mounting holes with sypherical bushings. They will get elongated.
I actually wore a couple of the bushings out. Well i egged them out with only 300hp 400 with the bottle. They sent me replacements for free. This was something like 5 years after of street abuse as a daily.
I didnt ask for it they just asked for my addy.
Leave a comment:
-
Originally posted by Back N Black View PostLooks good! You clean the rear end and paint it while you was under there?
Leave a comment:
-
Looks good! You clean the rear end and paint it while you was under there?
Leave a comment:
-
Drove car to work today. Very nice solid feel. And no more tire rub! Nice!
Leave a comment:
-
Originally posted by Mach1 View PostLeft bearing cap is upside down FYI
Leave a comment:
-
Ok.. I installed the new UPR upper spherical housing bushings. Got a complete new 31 spline Cobra diff. I discovered 31spline spider gears will not work in a 28spline carrier housing. Axles in and diff all mounted
Discovered I needed to space out the disc brake caliper mount just a bit. Might try swapping axle braket and see if that will make up the difference I need to not use a set of washers..
Leave a comment:
-
Originally posted by jyro View PostWhat differential you going to use?
Leave a comment:
Leave a comment: