sleepers 1981 zephyr lsx/th400/turbo

[junk racing]

Ah hell, id just use a couple cans of brake cleaner

[Sleeper]

Got the pistons cleaned up, rings checked and re assembled.

Just need new oil pan and some gaskets and the heads back. Studs are on the way.

[junk racing]

Nice

[Sleeper]

No big updates. I did find a bad thrust bearing so the motor shit is on hold. Im out of money for the most part as well. I am going to try my best to have my rear suspension ordered this month. Then the rear will be done besides welding tq boxes and subframes in.

For now i decided to yank all the harness out and start pulling out crap i dont need anymore and run it inside the driver fender. I did get the hood latch line done today. I am just trying to keep moving forward even if im poor.

[Z06killinsbf]

Time to sand and rattle can paint then!

[Sleeper]

eventually. I want to try that crap don used on his hood. I know the paint code and have a paint gun, but spray cans would be so much easier.

[Sleeper]

And it begins.

[Sleeper]

I fucking hate wiring.

Staring at these damn wiring diagrams seeing what i can pull etc.

[dsrtuckteezy]

And it begins.

expecting trouble?

[Sleeper]

got tired of it poking me in the side. You never know though one of the farm cats might get froggy.

[Sleeper]

More team z goodness.

[Z06killinsbf]

Nice

[KBScobravert]

Should keep the rear straight.

[Sleeper]

Getting the rest of the crap out. So far one canadian coin from 1994, a cigerette and a half smoked joint and a couple lighters. Going to scrape all the deadner out i think. I might replace it later.

[Blue88Coupe]

I was curious about the Team Z upper relocation deal. I called and asked if the fairmonts extra 2" wheel base would cause the uppers to be off and they told me not to run them. Did you get a different story or are you just going to try them out?