sleepers 1981 zephyr lsx/th400/turbo

[Sleeper]

I will prob end up having to cut the rest out and half sleeve it due to how my next turbos oil drain is.

I actually thought of having solid bushings made for the k member too, but like baron said they are basically solid from the get go

[Sleeper]

Got the relay Center mounted. Starting on rough template for gauges. Don't know I want to run 2 or 3.

Oil pressure, fuel level and trans temp. Is the gauges I need.

[Blue88Coupe]

Got the relay Center mounted. Starting on rough template for gauges. Don't know I want to run 2 or 3.

Oil pressure, fuel level and trans temp. Is the gauges I need.

fuel level??? now you're just showin out.

[Sleeper]

fuel level??? now you're just showin out.

My best Chris hamilton (I'm a street car !)

[Mysticcobrakilla]

My best Chris hamilton (I'm a street car !)

No rag on your head no care.

[Sleeper]

People who say they build these things cheap are full of shit or can steal stuff.

With the relay panel, and since megasquirt signal grounds the relays I had to buy and build some relays for the fuel pump,transbrake/bump box, fans

I havnt even got to the battery relocation stuff besides the switch.

[Sleeper]

Relay panel and ecu mount done. Winter storm has delayed some parts, but I'll throw this is tomorrow and get the ms3 wired into the car hopefully.

[DON SVO]

Good progress, dude!

[Sleeper]

Started on the mission today to get ms3 fired up and test one fan to make sure of my wiring before finishing it up. Got pissed trying to find a good 12 v keyed source that stayed on while cranking. So this happened.



I did get to delete some wires, so that was nice.

I had issues with the drivers for the USB cable. But finally around 2 am I got the damn thing to work. Loaded a tune and changed the temps so fan would kick on. One fan is loud need to hook both up tomorrow and see how loud they are together lol.

I'm going to leave the dash out and wait for the rest of my wiring stuff to get here, finish it all up before installing it back into the car.

Was a cool feeling seeing the ecu fire.

[Sleeper]

https://youtu.be/DdBqDOtO73k

[Sleeper]

[Sleeper]

Ruining this front seat crawling around on it.

[4EyedTurd]

Well, does it run yet?

[Sleeper]

Well, does it run yet?

Nope, but im a step closer.

[Gasser64]

Ruining this front seat crawling around on it.

There is a somewhat inexpensive upholstery shop on jacksboro highway. I've seen their work, they do good work. Lets say that the workers may be, well lets say that they don't all speak good english. But from what I can tell, their work is as good as anywhere else, at about half to 2/3 of normal price. I'll be taking anything I have that needs reupholstered to them.