1990 coupe street car driver build

[FOKAI]

[FOKAI]

The mustang II rack will work on a fox but not with on3 kit here is the issue I ran into, I ended up tradi d rack for a stock unit. .

[Matt]

Looks nice. You need to open up that hole for the charge pipe and put some sort of insulation between the pipe and inner fenders or it will wear a hole pretty quick in the aluminum.

[Sleeper]

Will a flaming river rack work?

I agree to also open that hole up and put something on it.

[FOKAI]

Yes I will be opening it up a little more and be pitting nylon tubing on. Flaming river rack will work. the mustang II rack brackets just pushed it out to far. I'm going with a stock unit for now till funds are available.

[BlueCoupeRedVert]

Yes I will be opening it up a little more and be pitting nylon tubing on. Flaming river rack will work. the mustang II rack brackets just pushed it out to far. I'm going with a stock unit for now till funds are available.

Thats weird the MII rack didn't work.

[FOKAI]

Thats weird the MII rack didn't work.

The rack works great just not with the on3 kit.

[BlueCoupeRedVert]

The rack works great just not with the on3 kit.

Thats what I was referring to. Do you have new rack mounted yet?

[FOKAI]

Yeah got it all installed just waiting for brackets to come in to mount p/s pump. In order to get car fired up I have to finish wiring. Re-install fuel pump and get a 45 elbow to connect hat to cold side. Other than that turbo kit is mostly done. Can't wait, been down for a while now.

[FOKAI]

barely any clearance with new rack going to have to wrap pipping anyways should help.

[FOKAI]

. .

[FOKAI]

.

[FOKAI]

.

[FOKAI]

[Notchnate]

Beautiful car, I can't wait to see it finished!