get off your butt and build something

[Shaggin Wagon]

The Rivis to me have always had similar lines to the Impala/ Caprice so if it were mine I'd go traditional low rider with it...

This is EXACTLY what I would do with the car, its a cruiser, not a hot rod imo.

[Craizie]

who you talking to?

I'd just assume he was talking to you and I wouldn't fuck around and tint my windows. Egg is hard as shit to clean up in the summer.

[4bangen]

if you tint those windows i'll egg your house.

who you talking to?

[BLAKE]

If you tint those windows I'll egg your house.

[HarrisonTX]

I would agree. Polish up that chrome, freshen the black in the windows, narrow whites, and it would be clean as a whistle!

I agree with both these dudes. We do the wheels which is almost free, some even fresh tint all the way around and a front bumper. Aesthetics done

[4bangen]

You’re going to have $2000+ in just universal parts. I’m not talking cheapeast of the cheap, just quality stuff that will ride nice.

I was thinking 3-5K would be my cost, but closer to 3 than 5. but we will see what it looks like when I put a front bumper back on it. might put it where I want it height wise. I've just always imagined this car on bags. Always been my dream.

[Z06killinsbf]

the cougar? I'd hope mine would be cheaper since it's already got a 4 link rear.
I'm waiting on a quote from them now. Oddly enough there's not out of the box kit for my car. lol

You’re going to have $2000+ in just universal parts. I’m not talking cheapeast of the cheap, just quality stuff that will ride nice.

[4bangen]

The Rivis to me have always had similar lines to the Impala/ Caprice so if it were mine I'd go traditional low rider with it...

I'm far to fat nerdy white guy to ever pull that off. lol

[Chopped54]

The Rivis to me have always had similar lines to the Impala/ Caprice so if it were mine I'd go traditional low rider with it...

[Baron Von Crowder]

Danny's usually not wrong on car stuff. Polish the whole car, freshen up the wheels, and they decide what way you want to go. I've put like 6 or 7 sets of wheels on mine and very few looked like what I thought they would.

[black2002ls]

I know you're talking about finding another set of wheels for the Riv, but I think it would look awesome with those stock wheels after some fresh black paint in the windows and some elbow grease polishing up the chrome. Instead of air ride (which is an enormous pain in the ass!) maybe cut one coil out of the front and see what ya got. It is already pretty low and being a 3-ton Buick I know it rides good...

I would agree. Polish up that chrome, freshen the black in the windows, narrow whites, and it would be clean as a whistle!

[46Tbird]

I know you're talking about finding another set of wheels for the Riv, but I think it would look awesome with those stock wheels after some fresh black paint in the windows and some elbow grease polishing up the chrome. Instead of air ride (which is an enormous pain in the ass!) maybe cut one coil out of the front and see what ya got. It is already pretty low and being a 3-ton Buick I know it rides good...

[4bangen]

And she wasn't even alive the last time it ran!

[4bangen]

this picture really shows how long its been since the last time I worked on the car. bottom picture was taken when I pulled the car out to swap the motor last time. Top pic was taken last weekend when I finally got it running. Same kid! lol

[4bangen]

They quoted me at $5100 for a complete set up for my car.

the cougar? I'd hope mine would be cheaper since it's already got a 4 link rear.
I'm waiting on a quote from them now. Oddly enough there's not out of the box kit for my car. lol