Connector question

[bonnie&clyde]

Anyone know what kind of connector this is and where I can get some???

Sent from my SPH-L720T using Tapatalk

[prostock1]

I might have a complete 5 pin relay connector housing, I used several of those back when I had a drag car.
I'll check tomorrow when I go to my shop.

[bonnie&clyde]

Sweet let me know, wanna see if I can shorten this cable

[prostock1]

Scroll through this companies online catalog.

http://www.mouser.com/Connectors/Terminals/_/N-5g5u?No=400&P=1yroslpZ1z0z4xuZ1z0yy6b

[4EyedTurd]

http://m.delcity.net/store/Packard-56-Female-Terminals/p_9291

Maybe

[prostock1]

I have 2 old BMW relay sockets, 1 new 5 prong Bosch relay and 1 new China 5 prong relay....yours if you want them

[LS1Goat]

http://m.delcity.net/store/Packard-5...rminals/p_9291

Maybe

^That or some kind of non insulated crimp blade terminal. I've seen similar at Napa.

[LS1Goat]

Faston Female 1/4" tab-lok terminal

[bonnie&clyde]

I have 2 old BMW relay sockets, 1 new 5 prong Bosch relay and 1 new China 5 prong relay....yours if you want them

Well the thing is that I'm doing a wire tuck and was gonna cut those ends and make them shorter so I was just looking for those ends, need 12 total so far, thanks tho

[dsrtuckteezy]

looks like a simple spade connector that you can get from radio shack

[4king]

I sell simple spade terminals here at AZ or at any auto parts store.

That looks like a standard size, we also sell the Mico size that I have used to repin a factory radio back into a vehicle

[4EyedTurd]

Why don't you cut the wire and just solder and heat shrink it, seems like a lot less trouble?

[bonnie&clyde]

Why don't you cut the wire and just solder and heat shrink it, seems like a lot less trouble?

That's what I think I'm gonna have to do if I can't find the ends, just didn't wanna have splices everywhere

[bonnie&clyde]

I sell simple spade terminals here at AZ or at any auto parts store.

That looks like a standard size, we also sell the Mico size that I have used to repin a factory radio back into a vehicle

What auto zone u at? Might have to stop by and see if I can try some out

[4king]

Any autozone or oreilleys should have these