Announcement

Collapse
No announcement yet.

Saginaw Power Steering Pump

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Saginaw Power Steering Pump

    Headed to the JY tomorrow for a few things and one thing is power steering pump for the rack and pinion conversion on my Torino. I already have an aftermarket bracket that uses a Saginaw pump with a stud on the back. What's the best car to find this on? Did different years have different pressure? The rack is supposed to work with 800 - 1200 psi.
    1971 Ford Torino - Time to go bigger and better.

    2011 F150 Limited - Stock with a 6.2

  • #2
    You can get a brand new one for under $80. Do not try to save money by getting a used one.
    Magnus, I am your father. You need to ask your mother about a man named Calvin Klein.

    Comment


    • #3
      Really? I was seeing 100+ for different pumps.

      But really either way, new or used, I need to know what pump to get.

      Plus a used pump will come with a pulley and I can grab the hose end for my new hoses.

      Were any offered with a serpentine pulley?
      1971 Ford Torino - Time to go bigger and better.

      2011 F150 Limited - Stock with a 6.2

      Comment


      • #4
        Originally posted by Torinoman View Post
        Really? I was seeing 100+ for different pumps.

        But really either way, new or used, I need to know what pump to get.

        Plus a used pump will come with a pulley and I can grab the hose end for my new hoses.

        Were any offered with a serpentine pulley?
        Many came with a serpentine pulley. If I recall correctly there were a few different generations of saginaw pumps and they differed in how the pulley was attached. Some just pressed on, some were held on with a nut and some were pressed on and there was a woodruff key on the shaft. I am not sure which one to tell you to get though; sorry. My statement of under $80 was Rockauto prices.
        Magnus, I am your father. You need to ask your mother about a man named Calvin Klein.

        Comment


        • #5
          I'm really more concerned about line pressures but I found a place online that sells pistons that limit pressure to 800psi. For 20bucks at pick n pull I'll just grab a pump with a pulley and take my chances I guess.
          Last edited by Torinoman; 04-22-2016, 10:20 PM.
          1971 Ford Torino - Time to go bigger and better.

          2011 F150 Limited - Stock with a 6.2

          Comment


          • #6
            I just remembered that there is a Saginaw pump that has a remote reservoir that is the model used most often for power steering systems on dirt track cars and aftermarket PS kits.
            Magnus, I am your father. You need to ask your mother about a man named Calvin Klein.

            Comment


            • #7
              Are you thinking of the type II pumps?
              1971 Ford Torino - Time to go bigger and better.

              2011 F150 Limited - Stock with a 6.2

              Comment


              • #8
                Originally posted by Torinoman View Post
                Are you thinking of the type II pumps?
                I think so but things are a little fuzzy for me at the moment. Been up too long and ingesting too much caffeine today will not let me go to sleep.
                Magnus, I am your father. You need to ask your mother about a man named Calvin Klein.

                Comment


                • #9
                  Didn't end up getting one. They only had trucks with press on pulleys which made removing the pump a pain in the ass. It was way more trouble than it was worth.

                  Guess I'll just buy a new one
                  1971 Ford Torino - Time to go bigger and better.

                  2011 F150 Limited - Stock with a 6.2

                  Comment

                  Working...
                  X