Is this a symptom of frozen pipes? Just went to the restroom to wash my hands, turned hot water knob and no water. Turned cold on and plenty of water. Went over to my wife's sink and water on both sides. Is this an indicator of a frozen pipe? Anything I can do at this point or am I fubared?
Announcement
Collapse
No announcement yet.
uh oh, turned faucet knob and no water
Collapse
X
-
Originally posted by SMKR View PostIs this a symptom of frozen pipes? Just went to the restroom to wash my hands, turned hot water knob and no water. Turned cold on and plenty of water. Went over to my wife's sink and water on both sides. Is this an indicator of a frozen pipe? Anything I can do at this point or am I fubared?
-
Originally posted by Chili View PostIf the water worked on her side you should be fine. Check the valve on your side.. Or your faucet is broken.
Comment
-
Originally posted by SMKR View PostOk im hoping that is it. I did though get under the sink and the hot water pipe coming in from the wall running up to the hot water side is ice cold, the cold water pipe is cold, but not that cold. I just ran a hair dryer down there on the valve/line for about 5 minutes but still nothing.
Comment
-
-
Leave the undersink cabinets open. Turn the heat up in the house a little higher than usual. Run the hot water on the nearest sink. That will warm up the line from the heater to that sink, and eventually the one that's frozen.
<=== lived in northern Michigan for five years.Last edited by Leah; Yesterday at 10:18 PM.
Comment
-
Originally posted by propellerhead View PostLeave the undersink cabinets open. Turn the heat up in the house a little higher than usual. Run the hot water on the nearest sink. That will warm up the line from the heater to that sink, and eventually the one that's frozen.
<=== lived in northern Michigan for five years.
Comment
-
I kind of have the same issue.. I have a toilet at work that quit working today (valve is open but wont run fresh water into the unit) the wall it backs up to is brick to the north part of the building. It will still flush if you fill manually fill the bowl up with water.. foezen line of a bigger problem?"PSH!!!"
Comment
-
I have my main kitchen faucet dripping tonight but forgot to do my master bathroom faucets as they sit directly in an outer wall. Dropped a load and went to wash my hands this morning and no cold water from one of the faucets. Hot & cold work in the tub & the separate shower. There are two sinks in our master. The cold & hot work on my wife's sink. Only hot works on mine.
I'm hoping I'm not screwed by a bursting pipe! I just bought this damn house a year ago....Hellcat Charger
Comment
-
Originally posted by Stephen View PostI kind of have the same issue.. I have a toilet at work that quit working today (valve is open but wont run fresh water into the unit) the wall it backs up to is brick to the north part of the building. It will still flush if you fill manually fill the bowl up with water.. foezen line of a bigger problem?-Blaine
Comment
Comment