Craigslist stories, deals, and whores

[Baron Von Crowder]

http://dallas.craigslist.org/dal/cto/4739246170.html

[Cannon88]

Looks like the real deal...

http://dallas.craigslist.org/ndf/zip/4743819740.html

[akfodysvn]

http://tulsa.craigslist.org/cto/4744340080.html

Selling my beloved 2011 built motor Shelby GT500. The car is amazing but I would like to take care of some other priorities in my life. I will forever regret this and my loss is truly your gain as this car can not be built for this price period. Not to mention the buyer won't have to go through the build pains and time pains I had to go through. The car is PAID for and I do not have to sell it so nothing unreasonable....yes...50k or less is unreasonable.

These are the specs on the car plus some pictures:

MODS:

Built Engine by Tim Eichorn of MPR Racing Engines (Custom Diamond Pistons, Manley I-beam Rods, ARP Hardware, raised compression (10.04:1)):
Engine Internal specifics:
Diamond Custom GT500 Pistons,Skirt coating
Diamond 01-5005 Spiro locks
Kris Starnes Racing/MPR Fully CNC Port GT500 heads to competition specs. CNC Valve job,Surface and assemble
AP ring set with AP steel top ring and napier second
H show contact info .200 Wal tool steel pins
Manley 14319-8 Billet I beam rods with ARP2000 bolts
Ford Racing M-6004-54SVT CompleteTiming chain,Gear,and Guide kit
Custom GT500 main bearing set
CB-1442HXK Coated rod bearings
Darton Big bore sleeve conversion,Square deck block,Bore and hone with Torque plates, Malance crankshaft
Custom Main Stud Kit for GT500 block
256-4001 ARP2000 head stud kit
C5502-066 Head gasket
C5503-066 Head gaskets
Clevite CB-1442HXK Coated Rod bearings
Clevite CB-1442HK Coated Rod bearings
Custom Spring and retainer kit with locks
Ferrea F2165P Stainless Exhaust Valves
Ferrea F2164P Stainless Intake valves
Custom Grind GT500 Billet camshafts
256-1001 Camshaft Bolts
Gasket kit
NGK TR6 Spark plugs
FL-820S oil filter
Billet oil pump gears
Disassemble complete GT500 engine,clean,Assemble complete GT500 to competition specs,Time camshafts,Disassemble heads and install valve springs and retainers

Innovators West 10% Overdrive Dampner
Thump Racing Belt Tensioner
Heads Ported by Kris Starnes of Kris Starnes Racing (Stock heads ported, Manley springs, Ferrea Valves, Custom Bullet Racing Cams)
DivisionX 1800rwhp Return Style Fuel System with 3x Walbro 465lph pumps and CPE Triple pump hat
Bosch 205lb Injectors
Whipple Superchargers 4.0L supercharger
-3.25" pulley
-2.75" pulley
Ford Racing twin bore 65mm throttle body
Reische Performance GT500 170deg Performance Thermostat
JLT 148mm Super Big Air Intake
American Racing Headers 1 7/8" Longtube headers with Offroad X pipe
Kooks over axle pipe
Borla ATAK axle-back
MGW adjustable Short Throw Shifter
Mcleod Racing Twin Disc Clutch Kit
BMR double adjustable lower control arms/LCA relocation bracket, double adjustable panhard bar and Sway Bar relocation kit to fit 15x10" drag wheels
SCT X3 Tuned by Ken Bjonnes of Lund Racing
JLT Passenger Side Oil Separator
Mickey Thompson 305/35/20 ET Street Radials
M&H 28" tall x 4" wide front runners
Weld Racing RTS 17x5" front and 15x 10" rear painted gloss black with a red pinstripe accent on one of the spokes
3.73 gears
Steeda sport lowering springs
C&R dual pass, dual fan heat exchanger
Runs on E85
Install work done by a Shelby authorized Ford dealer in KS.

As far as cosmetics go:

Rocker panels sanded smooth and pain matched
Painted drag pack wheels
Roush side splitters sanded smooth and paint matched
Black Mamba Supersnake Hood
-Cowl portion is Matte black separated by a red pinstripe from the rest of the gloss black
2013 front splitter added then sanded smooth and paint matched
Custom Painted lights/badging
Borla Muffler tips painted matte black
Windows Tinted 5%


Interior Gauges:
Dual Aeroforce Interceptor guages with 3.5 BAR MAP sensor for boost monitoring and upgraded software to monitor IAT2s.

Tuned by Ken Bjonnes from LUND RACING on E85.

At 24 lbs of boost NO-SPRAY. 1000 RWHP 900 RWTQ. Motor is built to easily handle 30lbs of boost.

15,600 Miles on the car, Only 650 miles on Car Build. All Documented from shop mileage.

Im the second owner and after buying it stock and putting 13,500 miles on it, decided to build it to what it is now.

CAR HAS NEVER BEEN RACED...NEVER SEEN THE STRIP despite having an extra set of drag pack wheels. Just car shows.

Most all Receipts to everything that's ever been done to this Car.

Over $47,000 invested in aftermarket parts plus labor and tuning in this car!

Any questions on the car, feel free to give me a shout.
I drive this car to work whenever the weather permits and it behaves amazingly!!! Garage kept and I have the Shelby cover.


If you aren't familiar with the Ford market, MPR is THE go to builder and does all of the builds for the hyper high hp magazine shelbys/terminators/coyotes/etc.

Please text me only if seriously interested and no reasonable offer will be turned down!

seven ate 5 dos dos 1 3 tres 5 7

Chris

Here are some videos for you:

4th gear pull starting at a low rpm for traction:

http://vimeo.com/108668636

Walk around

http://vimeo.com/107710135

[Scott Mc]

When things seem too good to be true Alex!

[akfodysvn]

I know the guy.... tried to nonchalantly ask if the car has some issues or what...


Guy comes from CHOO CHOO money. His dad has some pretty amazing cars. Owner is in NE Kansas for those interested

[Pro88LX]

http://sacramento.craigslist.org/cto/4728695814.html

[UserX]

Fugly! But it does have new "breaks"

[Wanderer]

My next daily driver.

http://dallas.craigslist.org/dal/cto/4718418052.html

This Bugatti Veyron Replica is mounted on a 2004 Pontiac GTO. The body is made out of fiberglass and all the exterior parts (doors/hood/scoops/ect) as well as interior panels and dash are made out of fiberglass. The engine is a stage 1 modified ls1 corvette engine 400 hp 400 torque. This is a project I've been working on for a year now and I'm now putting it out there because it's getting to it's final stages of completion. Looking to find a buyer or a person of interest. To secure ownership of the car the payment will be divided into 2 parts, 1st payment being $55,000, and 2nd payment afterwards when its completed $55,000. Finished and done this car is worth $110,000...(price isn't very negotiable, if not that price then it has to be something close to it). For more information, pics, details, and videos of the project contact me by phone
show contact info
or through email. My name is Manuel...se habla español

[bcoop]

LOL @ $55K before it's finished. hahahaha

[talisman]

Manuel, eh? People wonder where stereotypes come from.

[Wanderer]

LOL @ $55K before it's finished. hahahaha

I got a pretty good laugh at that too.

Manuel, eh? People wonder where stereotypes come from.

Ha ha, yeah, about that.....

[71chevellejohn]

The reason it's not finished is because Manuel can't figure what shingles will look best on it.

[Frank]

I guess Manuel is a Mexi-CAN'T.

[homealone]

LOL @ $55K before it's finished. hahahaha

It was 60k and 120k last week. At least he's being reasonable now. lol

[Craizie]

Pretty cool Grill. Not sure if it's 4k cool, but cool.
http://dallas.craigslist.org/ndf/cto/4691761961.html

Ultimate Party Grill!
Cooking surface is 2' wide x 10' long
Side racks are 12" wide x 10' long
Stainless steel perforated cooking surface

Known to cook:
700 1.25" thick ribeye steaks in 1 hour
600 hotdogs and 400 hamburgers in 30 min

Bulldog coupler trailer hitch
Bulldog jack with wheel
4 pin wire harness with lights
ITS axels
Custom tires and wheels with matching spare tire

$4000 OBO