modular fox vs LSX fox

[Blackpony]

oh nice, that sounds convenient.

I didn't get kicked out of that one

yeah it will definately be nice, the school is literally at the end of my street, about 400 yards away.. will save us on gas running back and forth to denton twice a day.. how the supra coming along btw? did you ever get the right turbo on it?

[Junkie]

yeah it will definately be nice, the school is literally at the end of my street, about 400 yards away.. will save us on gas running back and forth to denton twice a day.. how the supra coming along btw? did you ever get the right turbo on it?

Turbo hasn't come back from Precision, I'll most likely be going to 2k on the cast wheel setup.

It goes to JamesB tomorrow so he can lower the Kirkey, then if weather is nice this weekend she will end up at the race track

[crapstang]

oh nice, that sounds convenient.

I didn't get kicked out of that one

What schools did you go to that kicked you out?

[Blackpony]

Turbo hasn't come back from Precision, I'll most likely be going to 2k on the cast wheel setup.

It goes to JamesB tomorrow so he can lower the Kirkey, then if weather is nice this weekend she will end up at the race track

Kool man, good luck with it! Its a beast for sure!

[crapstang]

Kool man, good luck with it! Its a beast for sure!

I was gonna say hi friday, but you were busy apparently...I was there when that blue 408 nitrous goat was making some pulls

[STROKD]

nope...just off topic and 351W's BLOWWW lol. clevelands forever

Wow. Yea, you really do not know shit about windsors. Cleveland heads were cool in the 60s but they don't have shit on modern tech windsors.

[ram57ta]

it's been working for me. Are you using a phone?

nope.

[crapstang]

Wow. Yea, you really do not know shit about windsors. Cleveland heads were cool in the 60s but they don't have shit on modern tech windsors.

...wow

[Blackpony]

Wow. Yea, you really do not know shit about windsors. Cleveland heads were cool in the 60s but they don't have shit on modern tech windsors.

Gonna have to completely disagree with you there matt. I know of a few clevelands that make more power on motor then most windsors could even dream of making. The only problem with them is they are very heavy, and parts are not as readily available. I have a buddy back home running a cleveland that runs high 5's in the 1/8 on motor with 80% factory parts! stock heads, stock crank, stock block only has good rods, pistons and cam shaft. Not saying there are not any windsors that run 5's on motor, but most you will see run low 6's and have at least twice the money invested.

[VaderTT]

Clevor.

[crapstang]

Gonna have to completely disagree with you there matt. I know of a few clevelands that make more power on motor then most windsors could even dream of making. The only problem with them is they are very heavy, and parts are not as readily available. I have a buddy back home running a cleveland that runs high 5's in the 1/8 on motor with 80% factory parts! stock heads, stock crank, stock block only has good rods, pistons and cam shaft. Not saying there are not any windsors that run 5's on motor, but most you will see run low 6's and have at least twice the money invested.

thank you...
too bad the cylinder walls are thin on the clevelands too the closed chamber 4v's could make some serious power with cams, intake, and a carb!

[FoxBodyNick]

Clevor.

Yes Sir.

[Blackpony]

thank you...
too bad the cylinder walls are thin on the clevelands too the closed chamber 4v's could make some serious power with cams, intake, and a carb!

yeah, but so long as the cylinders are round just hone that bisch, pop some new rings in, fill the block about half way with filler, and drive the hell outta it!!

[Blackpony]

Clevor.

meh, too much work. just buy a set of afr's if a windsor is what you want.

[crapstang]

yeah, but so long as the cylinders are round just hone that bisch, pop some new rings in, fill the block about half way with filler, and drive the hell outta it!!

yup...until a hole is blown in the side lol! The blocks are a great design besides that...and the lower end is very strong for being unforged